Hi, I'm seeking advice with an observation that I'm seeing on the Cyclone5 devkit/sockit.
I'm working with U-Boot version v2018.05-rc1. Building the u-boot-with-spl.sfp, then writing the sfp file to the 0xa2 partition on the SD card, does not boot, all I get is this: U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500) U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500) U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500) This issue doesn't happen at all on the DE0 Nano SoC board. I compared the defconfig and came across this. If I remove these config options in the socfpga_sockit_defconfig, then SPL -> U-Boot works fine. -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y I'll continue to debug of course, but was wondering if anyone might have a better idea as to what could be happening, I'd appreciate the insight. Dinh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot