Some boards support an SD card and an eMMC device at the same time. Since both belong to 'mmc', they are identified by a device number. When the device number of the eMMC is 1 instead 0, "mmc dev" command must be performed to switch the target device before flashing images.
Signed-off-by: Masahiro Yamada <[email protected]> --- include/configs/uniphier.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 5d4e86d..f359d85 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -186,6 +186,7 @@ "setexpr tmp_addr $nor_base + 0x70000 && " \ "tftpboot $tmp_addr $third_image\0" \ "emmcupdate=mmcsetn &&" \ + "mmc dev $mmc_first_dev &&" \ "mmc partconf $mmc_first_dev 0 1 1 &&" \ "tftpboot $second_image && " \ "mmc write $loadaddr 0 100 && " \ -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
