From: Stefan Agner <[email protected]> Add use_minimum_ecc as struct mxs_nand_info field in preparation for device tree support.
Signed-off-by: Stefan Agner <[email protected]> --- drivers/mtd/nand/mxs_nand.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index b5fd0fdd62..978f6a6893 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -70,6 +70,8 @@ struct bch_geometry { struct mxs_nand_info { struct nand_chip chip; + unsigned int max_ecc_strength_supported; + bool use_minimum_ecc; int cur_chip; uint32_t cmd_queue_len; @@ -214,19 +216,11 @@ static inline int mxs_nand_calc_mark_offset(struct bch_geometry *geo, return 0; } -static inline unsigned int mxs_nand_max_ecc_strength_supported(void) -{ - /* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */ - if (is_mx6sx() || is_mx7()) - return 62; - else - return 40; -} - static inline int mxs_nand_calc_ecc_layout_by_info(struct bch_geometry *geo, struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); + struct mxs_nand_info *nand_info = nand_get_controller_data(chip); if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) return -ENOTSUPP; @@ -249,7 +243,7 @@ static inline int mxs_nand_calc_ecc_layout_by_info(struct bch_geometry *geo, if (geo->ecc_chunk_size < mtd->oobsize) return -EINVAL; - if (geo->ecc_strength > mxs_nand_max_ecc_strength_supported()) + if (geo->ecc_strength > nand_info->max_ecc_strength_supported) return -EINVAL; geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size; @@ -260,6 +254,9 @@ static inline int mxs_nand_calc_ecc_layout_by_info(struct bch_geometry *geo, static inline int mxs_nand_calc_ecc_layout(struct bch_geometry *geo, struct mtd_info *mtd) { + struct nand_chip *chip = mtd_to_nand(mtd); + struct mxs_nand_info *nand_info = nand_get_controller_data(chip); + /* The default for the length of Galois Field. */ geo->gf_len = 13; @@ -291,7 +288,7 @@ static inline int mxs_nand_calc_ecc_layout(struct bch_geometry *geo, / (geo->gf_len * geo->ecc_chunk_count); geo->ecc_strength = min(round_down(geo->ecc_strength, 2), - mxs_nand_max_ecc_strength_supported()); + nand_info->max_ecc_strength_supported); return 0; } @@ -1041,9 +1038,8 @@ static int mxs_nand_setup_ecc(struct mtd_info *mtd) uint32_t tmp; int ret = -ENOTSUPP; -#ifdef CONFIG_NAND_MXS_USE_MINIMUM_ECC - ret = mxs_nand_calc_ecc_layout_by_info(geo, mtd); -#endif + if (nand_info->use_minimum_ecc) + ret = mxs_nand_calc_ecc_layout_by_info(geo, mtd); if (ret == -ENOTSUPP) ret = mxs_nand_calc_ecc_layout(geo, mtd); @@ -1279,5 +1275,15 @@ void board_nand_init(void) nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE; nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; + /* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */ + if (is_mx6sx() || is_mx7()) + nand_info->max_ecc_strength_supported = 62; + else + nand_info->max_ecc_strength_supported = 40; + +#ifdef CONFIG_NAND_MXS_USE_MINIMUM_ECC + nand_info->use_minimum_ecc = true; +#endif + mxs_nand_init(nand_info); } -- 2.17.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
