To fix the issue of write the rootfs.ubi, adjust the smc timings configuration of the nand controller.
Based on original work by Wenyou Yang Signed-off-by: Eugen Hristev <[email protected]> --- board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c index 4c2e209..39d1b38 100644 --- a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c +++ b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c @@ -34,10 +34,10 @@ static void board_nand_hw_init(void) writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) | + writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(4) | AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3), &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(5), &smc->cs[3].cycle); writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) | AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) | -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
