From: Simon Glass <s...@chromium.org> To: Duncan Hare <d...@synoia.com> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Joe Hershberger <joe.hershber...@ni.com> Sent: Tuesday, April 24, 2018 10:01 PM Subject: Re: [PATCH v10 3/3] Adding wget Hi Duncan,
On 22 April 2018 at 21:22, Duncan Hare <d...@synoia.com> wrote: > >>The server can be tested with the wget command which >> can be installed on linux. >> I doubt that loop-back like this will produce the scrambling of packet order >> which is a feature of push down stacks for packet queues >> in the internet. >> >> Hence my comment in a different thread about buffering on the pi. Few of the >> socs appear to use net_pkt_buf buffers for net traffic. >> >> If there are too many transmission errors the sending tcp drops the >> connection. My solution to this is to halve the size of >> CONFIG_SYS_RX_ETH_BUFFER until transmission works. >> > >> Possibly CONFIG_SYS_RX_ETH_BUFFER could come under Kconfig. > >>Just to be clear, I was wondering about having an automated test. Manual >>tests are not very useful since people won't do them. See 'make tests' for >>all the test that we >currently >run. I'm pretty sure you could standard up a >>little server, run your wget, then shut it down, all within a pytest test. >>Regards, >>Simon Hi Wolfgang. Simon Can we put a test 4 Mbyte kernel on the u-boot website for an automated test for other users of TCP & Wget in u-boot? Then I can produce a standard u-boot script for testing. RegardsDuncan Hare _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot