Dear Fabio Thank you very much for your helps.
Yes, my end goal is to be able to boot from SPI flash, with SPL. We are preparing another PCB to check if we can boot from eMMC/SD. We received a service proposal from Otavio yesterday, evaluating it. But if exist, I wish to contact a person who is responsible from SPL in group as well. Best regards. -----Original Message----- From: Fabio Estevam [mailto:feste...@gmail.com] Sent: Wednesday, May 2, 2018 8:27 PM To: Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> Cc: u-boot@lists.denx.de; Kutsal ANIL <kutsal.a...@pavotek.com.tr> Subject: Re: [U-Boot] u-boot 2018 SPI SPL Hi Mehmet, On Mon, Apr 30, 2018 at 3:24 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > Dear Fabio, > > Windows 10 tried but could not load the device driver of our eMMC > (micron tech MTFC4GLDDQ). Then > > I programmed SPL and u-boot.img into eMMC with u-boot commands; even SPI > flash based SPL see the MMC1(eMMC), u-boot did not run correctly. I am a bit confused of what you are trying to achieve. Is your end goal to be able to boot from SPI NOR using SPL on a mx6? Are you able to boot from SPL from the eMMC or SD card? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
