On 17 May 2018 at 19:13, Alex Kiernan <alex.kier...@gmail.com> wrote: > Convert USB fastboot code to use shared fastboot protocol. > > Signed-off-by: Alex Kiernan <alex.kier...@gmail.com> > --- > > Changes in v2: > - remove redundant version.h > - use new fastboot_get_bytes_remaining() function > > drivers/fastboot/Makefile | 4 +- > drivers/usb/gadget/f_fastboot.c | 318 > +++++----------------------------------- > 2 files changed, 37 insertions(+), 285 deletions(-) >
Hi Alex, Unfortunately this patch breaks regular fastboot (over USB). At least on TI BeagleBoard X15. I tested your patch series using https://github.com/akiernan/u-boot.git, on branch us-fastboot-udp-v6 (hope it contains v2 of this patch). I'm unable to do "fastboot flash" or "fastboot oem format" commands after this patch. Below some debug output that can help you debug this issue. On host side I see: FAILED (remote: unrecognized command) On device side next messages appear: ** Unrecognized filesystem type ** buffer overflowstatus: -104 ep 'ep1in-bulk' trans: 0 command es not recognized. I'd appreciate if you can fix it in next series. Please add me to Cc: so that I can test it on my boards and verify if it's work. Also, as I understand, your github branch contains patches from different patch series. If you can split them into corresponding branches there, I can test your patch series separately and provide tested tag. Thanks. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
