Hi, On 28.5.2018 11:47, Jean-Jacques Hiblot wrote: > Hi Michal > > > On 28/05/2018 10:32, Michal Simek wrote: >> Hi Jean, >> >> On 25.5.2018 11:32, Jean-Jacques Hiblot wrote: >>> This series aims at bringing improvements to the dwc3_generic driver so >>> that it can be used by most of the platforms using the dwc3 controller. >>> >>> I tested this on with DRA7 and AM57x platforms for both Peripheral >>> and Host >>> operations. The code to enable DM USB host & dev support for those >>> platforms will be submitted in a separate series. >>> >>> Enhancements: >>> - use separate Kconfig option for DM USB Periphal and DM USB Host. This >>> allow platforms to keep their non-DM USB peripheral code and use the DM >>> USB host. >>> - fixes the bind/probe confusion in dwc3_generic. The probe is done when >>> the USB device is first needed. >>> - handles PHYs when in the peripheral mode. The code to handle the >>> PHYs is >>> shared with the host side >>> - handles clock and reset >>> - bind host controller to the more generic driver 'xhci-dwc3' >> I see two series which were sent recently without any description of >> dependencies. > Right I forgot. This series applies on to of the master branch of the > USB tree >> Will be good to push these patches somewhere to git and send a link that >> I can easily test. > I pushed all on github : https://github.com/jjhiblot/u-boot
I didn't build all patches to identify which one is introducing the issue. But look below at issues and please fix them. Then I will test. Thanks, Michal [u-boot](dwc3)$ nice -n 19 ./tools/buildman/buildman -b dwc3 zynqmp -o ../tmp/ -C -I -c 1 -sSed boards.cfg is up to date. Nothing to do. Summary of 1 commit for 20 boards (8 threads, 1 job per thread) 01: board: ti: am57xx: remove USB platform code aarch64: + xilinx_zynqmp_zc1751_xm016_dc2 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zc1751_xm017_dc3 xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zc1751_xm015_dc1 xilinx_zynqmp_zcu111_revA xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu104_revC +common/built-in.o: In function `run_usb_dnl_gadget': +build/../common/dfu.c:73: undefined reference to `usb_gadget_handle_interrupts' +build/../common/dfu.c:83: undefined reference to `usb_gadget_handle_interrupts' +make[1]: *** [u-boot] Error 139 +make: *** [sub-make] Error 2 + usb_gadget_realease(controller_index); + ^~~~~~~~~~~~~~~~~~~ +cmd/built-in.o: In function `do_fastboot': +build/../cmd/fastboot.c:50: undefined reference to `usb_gadget_handle_interrupts' +cmd/built-in.o: In function `do_thor_down': +build/../cmd/thordown.c:58: undefined reference to `usb_gadget_realease' +drivers/usb/gadget/built-in.o: In function `thor_rx_data': +build/../drivers/usb/gadget/f_thor.c:555: undefined reference to `usb_gadget_handle_interrupts' +drivers/usb/gadget/built-in.o: In function `thor_tx_data': +build/../drivers/usb/gadget/f_thor.c:589: undefined reference to `usb_gadget_handle_interrupts' +drivers/usb/gadget/built-in.o: In function `thor_init': +build/../drivers/usb/gadget/f_thor.c:706: undefined reference to `usb_gadget_handle_interrupts' w+../cmd/thordown.c: In function ?do_thor_down?: w+../cmd/thordown.c:58:2: warning: implicit declaration of function ?usb_gadget_realease? [-Wimplicit-function-declaration] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot