This commit removes text that is exact duplicated of the text above. Cc: Konstantin Porotchkin <[email protected]> Signed-off-by: Baruch Siach <[email protected]> --- doc/mvebu/cmd/bubt.txt | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/doc/mvebu/cmd/bubt.txt b/doc/mvebu/cmd/bubt.txt index 6f9f525936ba..a539c15bcde9 100644 --- a/doc/mvebu/cmd/bubt.txt +++ b/doc/mvebu/cmd/bubt.txt @@ -44,15 +44,6 @@ Notes: CONFIG_SYS_MMC_ENV_PART=1 Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1. Please never use partition number 0 here! - The eMMC has 2 boot partitions (BOOT0 and BOOT1) and a user data partition (DATA). - The boot partitions are numbered as partition 1 and 2 in MMC driver. - Number 0 is used for user data partition and should not be utilized for storing - boot images and U-Boot environment in RAW mode since it will break file system - structures usually located here. - The default boot partition is BOOT0. It is selected by the following parameter: - CONFIG_SYS_MMC_ENV_PART=1 - Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1. - Please never use partition number 0 here! - The partition number is ignored if the target device is SD card. - The boot image offset starts at block 0 for eMMC and block 1 for SD devices. The block 0 on SD devices is left for MBR storage. -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
