Change the description relating to CONFIG_SPL_ROCKCHIP_BACK_TO_BROM to
clarify that both RK3288 and RK3036 use
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
Signed-off-by: Heinrich Schuchardt <[email protected]>
---
doc/README.rockchip | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index d35071d653e..a35ca6f2c4e 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -124,11 +124,11 @@ something like:
=>
The rockchip bootrom can load and boot an initial spl, then continue to
-load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom.
-Therefore RK3288 has another loading sequence like RK3036. The option of
-U-Boot is controlled with this setting in U-Boot:
+load a second-stage bootloader (ie. U-Boot) as soon as the control is returned
+to the bootrom. Both the RK3288 and the RK3036 use this special boot sequence.
+The configuration option enabling this is:
- #define CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
+ CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
You can create the image via the following operations:
--
2.17.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
