The ARM64 has 2 MiB alignment requirement for the kernel. When using fitImage, this requirement may by violated, the kernel will thus be executed from unaligned address and fail to boot. Do what booti does and run booti_setup() for kernel_noload images on arm64 to obtain a suitable aligned address to which the image shall be relocated.
Signed-off-by: Marek Vasut <[email protected]> Cc: Bin Chen <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Tom Rini <[email protected]> --- V2: Protect the ARM64 booti bit with if IS_ENABLED(CMD_BOOTI) V3: Use if() instead of #ifdef --- common/bootm.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/common/bootm.c b/common/bootm.c index e789f6818a..fad8480a7a 100644 --- a/common/bootm.c +++ b/common/bootm.c @@ -202,8 +202,23 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc, } if (images.os.type == IH_TYPE_KERNEL_NOLOAD) { - images.os.load = images.os.image_start; - images.ep += images.os.load; + if (CONFIG_IS_ENABLED(CMD_BOOTI) && + images.os.arch == IH_ARCH_ARM64) { + ulong image_addr; + ulong image_size; + + ret = booti_setup(images.os.image_start, &image_addr, + &image_size, 1); + if (ret != 0) + return 1; + + images.os.type = IH_TYPE_KERNEL; + images.os.load = image_addr; + images.ep = image_addr; + } else { + images.os.load = images.os.image_start; + images.ep += images.os.image_start; + } } images.os.start = map_to_sysmem(os_hdr); -- 2.16.2 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
