Dear "Nikumbh, Raj (IE10)", In message <047570340a9b314187387acc723459acae0...@ie10ev811.global.ds.honeywell.com> you wrote: > > I want to use the u-boot-1.3.4 with the patch from AT91 for my custom > board based on AT91RM9200 with 32MB SDRAM (MT48LC8M16A2) and 8MB flash > (AT49BV6416-70TI). I am directly flashing the image to flash location at > 0x10000000 (beginning of the flash). But I am not able to see anything > on my debug port.
> I want to know if I am doing something wrong. We don't know your hardware or the changes you might have made to the code to adapt it for your hardware. Also, U-Boot 1.3.4 is very old. Please update to a current version (top of tree recommended) and try again. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de I am an atheist, thank God! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
