There is no reason to keep this gpio based code in architecture. Use
ledtrig-heartbeat.c instead which is much more flexible then this
ancient code.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/microblaze/Kconfig.debug       |  7 ----
 arch/microblaze/include/asm/setup.h |  3 --
 arch/microblaze/kernel/Makefile     |  2 --
 arch/microblaze/kernel/heartbeat.c  | 72 -------------------------------------
 arch/microblaze/kernel/timer.c      |  7 ----
 5 files changed, 91 deletions(-)
 delete mode 100644 arch/microblaze/kernel/heartbeat.c

diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
index 331a3bb66297..93a737c8d1a6 100644
--- a/arch/microblaze/Kconfig.debug
+++ b/arch/microblaze/Kconfig.debug
@@ -8,11 +8,4 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config HEART_BEAT
-       bool "Heart beat function for kernel"
-       default n
-       help
-         This option turns on/off heart beat kernel functionality.
-         First GPIO node is taken.
-
 endmenu
diff --git a/arch/microblaze/include/asm/setup.h 
b/arch/microblaze/include/asm/setup.h
index d5384f6f36f7..a38e4a56e3c6 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -19,9 +19,6 @@
 
 extern char *klimit;
 
-void microblaze_heartbeat(void);
-void microblaze_setup_heartbeat(void);
-
 #   ifdef CONFIG_MMU
 extern void mmu_reset(void);
 #   endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index 7e99cf6984a1..3a53378d66d9 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -8,7 +8,6 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_timer.o = -pg
 CFLAGS_REMOVE_intc.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
-CFLAGS_REMOVE_heartbeat.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_process.o = -pg
 endif
@@ -22,7 +21,6 @@ obj-y += dma.o exceptions.o \
 
 obj-y += cpu/
 
-obj-$(CONFIG_HEART_BEAT)       += heartbeat.o
 obj-$(CONFIG_MODULES)          += microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)              += misc.o
 obj-$(CONFIG_STACKTRACE)       += stacktrace.o
diff --git a/arch/microblaze/kernel/heartbeat.c 
b/arch/microblaze/kernel/heartbeat.c
deleted file mode 100644
index 2022130139d2..000000000000
--- a/arch/microblaze/kernel/heartbeat.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Michal Simek <mon...@monstr.eu>
- * Copyright (C) 2007-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/sched.h>
-#include <linux/sched/loadavg.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-
-static unsigned int base_addr;
-
-void microblaze_heartbeat(void)
-{
-       static unsigned int cnt, period, dist;
-
-       if (base_addr) {
-               if (cnt == 0 || cnt == dist)
-                       out_be32(base_addr, 1);
-               else if (cnt == 7 || cnt == dist + 7)
-                       out_be32(base_addr, 0);
-
-               if (++cnt > period) {
-                       cnt = 0;
-                       /*
-                        * The hyperbolic function below modifies the heartbeat
-                        * period length in dependency of the current (5min)
-                        * load. It goes through the points f(0)=126, f(1)=86,
-                        * f(5)=51, f(inf)->30.
-                        */
-                       period = ((672 << FSHIFT) / (5 * avenrun[0] +
-                                               (7 << FSHIFT))) + 30;
-                       dist = period / 4;
-               }
-       }
-}
-
-void microblaze_setup_heartbeat(void)
-{
-       struct device_node *gpio = NULL;
-       int *prop;
-       int j;
-       const char * const gpio_list[] = {
-               "xlnx,xps-gpio-1.00.a",
-               NULL
-       };
-
-       for (j = 0; gpio_list[j] != NULL; j++) {
-               gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]);
-               if (gpio)
-                       break;
-       }
-
-       if (gpio) {
-               base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL));
-               base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
-               pr_notice("Heartbeat GPIO at 0x%x\n", base_addr);
-
-               /* GPIO is configured as output */
-               prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL);
-               if (prop)
-                       out_be32(base_addr + 4, 0);
-       }
-}
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 7de941cbbd94..a6683484b3a1 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -156,9 +156,6 @@ static inline void timer_ack(void)
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
        struct clock_event_device *evt = &clockevent_xilinx_timer;
-#ifdef CONFIG_HEART_BEAT
-       microblaze_heartbeat();
-#endif
        timer_ack();
        evt->event_handler(evt);
        return IRQ_HANDLED;
@@ -318,10 +315,6 @@ static int __init xilinx_timer_init(struct device_node 
*timer)
                return ret;
        }
 
-#ifdef CONFIG_HEART_BEAT
-       microblaze_setup_heartbeat();
-#endif
-
        ret = xilinx_clocksource_init();
        if (ret)
                return ret;
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to