Hi Dennis, On Thu, Jun 14, 2018 at 02:10:31PM -0500, Dennis Gilmore wrote: > running sf probe on one of my clearfogs with this set of patches > applied I got > > SF: unrecognized JEDEC id bytes: ff, ff, ff > Failed to initialize SPI flash at 1:0 (error -2)
Do you use the clearfog_defconfig? Does current U-Boot master work for you? For the record, on my Clearfog Base 'sf probe' shows: SF: Detected w25q32bv with page size 256 Bytes, erase size 4 KiB, total 4 MiB This works with or without these patches. baruch > Dennis > > On Thu, 2018-06-14 at 18:17 +0300, Baruch Siach wrote: > > Add the "spi-flash" compatible string so that the generic sf_probe > > driver can probe the SPI flash on the SolidRun SOM. > > > > Signed-off-by: Baruch Siach <bar...@tkos.co.il> > > --- > > arch/arm/dts/armada-38x-solidrun-microsom.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi > > b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi > > index a2627223ce3b..74f58de85c43 100644 > > --- a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi > > +++ b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi > > @@ -86,7 +86,7 @@ > > w25q32: spi-flash@0 { > > #address-cells = <1>; > > #size-cells = <1>; > > - compatible = "w25q32", "jedec,spi-nor"; > > + compatible = "w25q32", "jedec,spi-nor", "spi-flash"; > > reg = <0>; /* Chip select 0 */ > > spi-max-frequency = <3000000>; > > status = "disabled"; -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - bar...@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il - _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot