Add EtherAVB PHY reset on V3M Eagle to let the AVB driver unreset the PHY.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
---
arch/arm/dts/r8a77970-eagle.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts
index 0c555b8dde..5b8b2f8704 100644
--- a/arch/arm/dts/r8a77970-eagle.dts
+++ b/arch/arm/dts/r8a77970-eagle.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Eagle board based on r8a77970";
@@ -38,6 +39,7 @@
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
status = "okay";
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
--
2.17.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
