The RAVB only supports 100Full and 1000Full operation, it does not support 10Full or any Half-duplex modes. The PHY could still advertise those features though, so filter out the PHY features accordingly.
Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Joe Hershberger <[email protected]> --- drivers/net/ravb.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c index d66fcef4e7..adcbc931e0 100644 --- a/drivers/net/ravb.c +++ b/drivers/net/ravb.c @@ -318,12 +318,13 @@ static int ravb_phy_config(struct udevice *dev) eth->phydev = phydev; - /* 10BASE is not supported for Ethernet AVB MAC */ - phydev->supported &= ~(SUPPORTED_10baseT_Full - | SUPPORTED_10baseT_Half); + phydev->supported &= SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | + SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_Pause | + SUPPORTED_Asym_Pause; + if (pdata->max_speed != 1000) { - phydev->supported &= ~(SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full); + phydev->supported &= ~SUPPORTED_1000baseT_Full; reg = phy_read(phydev, -1, MII_CTRL1000); reg &= ~(BIT(9) | BIT(8)); phy_write(phydev, -1, MII_CTRL1000, reg); -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
