This allows selection of the boot device at build time without source code modification.
Signed-off-by: Baruch Siach <[email protected]> --- include/configs/clearfog.h | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 1141aee08b6e..7d56dfd86e96 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -70,16 +70,6 @@ "initrd_high=0x10000000\0" /* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) @@ -96,13 +86,11 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI) /* SPL related SPI defines */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) /* SPL related MMC defines */ #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
