From: Denis Zalevskiy <[email protected]> The bus is statically defined, so remove redundant parameters from read_vpd() for PPD and Bx50v3.
Signed-off-by: Denis Zalevskiy <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> --- board/ge/bx50v3/bx50v3.c | 6 +++--- board/ge/mx53ppd/mx53ppd.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 33f7ee6e3be5..60d600c50c8b 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -624,14 +624,14 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2); } -static int read_vpd(uint eeprom_bus) +static int read_vpd() { int res; int size = 1024; uint8_t *data; unsigned int current_i2c_bus = i2c_get_bus_num(); - res = i2c_set_bus_num(eeprom_bus); + res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); if (res < 0) return res; @@ -715,7 +715,7 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); + read_vpd(); set_confidx(&vpd); diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index 0010998d66cf..317d7f69d5a1 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -329,7 +329,7 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr("ethaddr", vpd->mac1); } -static int read_vpd(uint eeprom_bus) +static int read_vpd() { struct vpd_cache vpd; int res; @@ -337,7 +337,7 @@ static int read_vpd(uint eeprom_bus) u8 *data; unsigned int current_i2c_bus = i2c_get_bus_num(); - res = i2c_set_bus_num(eeprom_bus); + res = i2c_set_bus_num(VPD_EEPROM_BUS); if (res < 0) return res; @@ -391,7 +391,7 @@ int board_late_init(void) { int res; - read_vpd(VPD_EEPROM_BUS); + read_vpd(); res = clock_1GHz(); if (res != 0) -- 2.18.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
