Hi kang,
On 26 February 2010 21:21, Minkyu Kang <proms...@gmail.com> wrote:
> Dear Naveen Krishna CH,
>
> On 26 February 2010 20:47, <ch.nav...@samsung.com> wrote:
> > From: Naveen Krishna CH <ch.nav...@samsung.com>
> >
> > Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be
> > loaded over tftp.
> >
> > The preinit function will configure GPIO (GPK0CON) & SROMC to look
> > for environment in SROM Bank 3.
> >
> > Signed-off-by: Naveen Krishna Ch <ch.nav...@samsung.com>
> > ---
> > Changes since V1:
> >
> > 1. The CONFIG_BOOTP* and Net config Macros are removed from config
> header.
> > Comments from Ben Warren are fixed
> > 2. The GPIO configuration is modified & Macro and Function are renamed.
> > Comments from Minkyu Kang are fixedChanges since V2
> >
> > Changes since V2:
> > 1. GPIO configurations function has been implemented.
> >
> > Changes since V3:
> > 1. Comments from Minkyu Kang are fixed.
> >
> > Changes since V4:
> > None
> >
> > Changes since v5:
> > 1. Compile time warning are fixed.
> >
> > board/samsung/smdkc100/smdkc100.c | 40
> +++++++++++++++++++++++++++++++++++++
> > include/configs/smdkc100.h | 12 ++++++++++-
> > 2 files changed, 51 insertions(+), 1 deletions(-)
> >
> > diff --git a/board/samsung/smdkc100/smdkc100.c
> b/board/samsung/smdkc100/smdkc100.c
> > index 15a1a27..76bd4cc 100644
> > --- a/board/samsung/smdkc100/smdkc100.c
> > +++ b/board/samsung/smdkc100/smdkc100.c
> > @@ -23,10 +23,41 @@
> > */
> >
> > #include <common.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/smc.h>
> > +#include <asm/arch/gpio.h>
> > +#include <netdev.h>
> > +
> > DECLARE_GLOBAL_DATA_PTR;
> >
> > +/*
> > + * Miscellaneous platform dependent initialisations
> > + */
> > +static void smc9115_pre_init(void)
> > +{
> > + u32 tmp;
>
> Why didn't delete this variable?
>
My Bad, Patch replaced. Can i send this one alone as v6 or
should i send the patch set again as v7
>
> > + u32 smc_bw_conf, smc_bc_conf;
> > +
> > + struct s5pc100_gpio *const gpio =
> > + (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
> > +
> > + /* gpio configuration GPK0CON */
> > + gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
> > +
> > + /* Ethernet needs bus width of 16 bits */
> > + smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
> > + smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) |
> SMC_BC_TACC(0xe)
> > + | SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4)
> > + | SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0);
> > +
> > + /* Select and configure the SROMC bank */
> > + s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf,
> smc_bc_conf);
> > +}
> > +
>
> Thanks
> Minkyu Kang
> --
> from. prom.
> www.promsoft.net
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
Shine bright,
(: Naveen Krishna Ch :)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
