Dear Wolfgang Wegner,

In message <[email protected]> you wrote:
> 
> While trying to debug this I am running into a somewhat strange
> problem with the symbol table relocation for debugging. I added a
> printf to board_init_r like this:
>       printf("gd->reloc_off: 0x%08x\n", gd->reloc_off);
> giving me:
>       gd->reloc_off: 0x07d84000
> my TEXT_BASE is 0x40020000, so I set this in my .gdbinit:
>       define ram
>               symbol-file
>               add-symbol-file u-boot 0x47da4000
>       end
> 
> Now in the debugger I do:
>       (gdb) ram
>       add symbol table from file "u-boot" at
>               .text_addr = 0x47da4000
>       (gdb) b board_init_r
>       Breakpoint 1 at 0x47da4672: file board.c, line 422.
> 
> but the breakpoint is never reached. I tried printing the function
> pointer from the code:
>       printf("%...@%p\n", __FUNCTION__, &board_init_r);
> resulting in:
>       board_ini...@47da466e
> The disassembly shows:
>       4002066e <board_init_r>:
>       4002066e:       4e56 ffc0       linkw %fp,#-64
>       40020672:       202d 0014       movel %a5@(20),%d0
>       40020676:       48d7 3c3c       moveml %d2-%d5/%a2-%a5,%sp@

I see no problem here. The 0x47da4672 you got above is obviously the
(correct) address for the "movel %a5@(20),%d0" instruction. Assuming
you can set breakpoints at all the code should stop there.

> and in the debugger I can see:
>       (gdb) print /x *0x47da466e
>       $1 = 0x4e56ffc0

Looks sane to me, too.

Which sort of debugger are you using? 

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected]
Death, when unnecessary, is a tragic thing.
        -- Flint, "Requiem for Methuselah", stardate 5843.7
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to