Now enet clock support available for imx6qdl and imx6ul, via CLK framework, so add enable, set_rate support in drivers.
Signed-off-by: Jagan Teki <[email protected]> --- drivers/net/fec_mxc.c | 58 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/fec_mxc.h | 6 +++++ 2 files changed, 64 insertions(+) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 694a0b2f7e..7998c8b8b2 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <clk-uclass.h> #include <dm.h> #include <environment.h> #include <malloc.h> @@ -1245,6 +1246,41 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev) return 0; } +#if CONFIG_IS_ENABLED(CLK) +static int fec_clk_enable(struct fec_priv *priv) +{ + int ret; + + ret = clk_enable(&priv->clk_ahb); + if (ret) { + printf("failed to enable ahb clk\n"); + return ret; + } + + if (generic_clk_valid(&priv->clk_ptp)) { + ret = clk_set_rate(&priv->clk_ptp, ENET_50MHZ); + if (ret) { + printf("failed to set 50MHz rate to ptp clk\n"); + goto failed_clk_ahb; + } + } + + if (generic_clk_valid(&priv->clk_enet_out)) { + ret = clk_set_rate(&priv->clk_enet_out, ENET_50MHZ); + if (ret) { + printf("failed to set 50MHz rate to enet_out clk\n"); + goto failed_clk_ahb; + } + } + + return 0; + +failed_clk_ahb: + clk_disable(&priv->clk_ahb); + return ret; +} +#endif + static int fecmxc_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); @@ -1253,6 +1289,12 @@ static int fecmxc_probe(struct udevice *dev) uint32_t start; int ret; +#if CONFIG_IS_ENABLED(CLK) + ret = fec_clk_enable(priv); + if (ret) + return ret; +#endif + ret = fec_alloc_descs(priv); if (ret) return ret; @@ -1331,6 +1373,22 @@ static int fecmxc_ofdata_to_platdata(struct udevice *dev) return -EINVAL; } +#if CONFIG_IS_ENABLED(CLK) + int ret; + + ret = clk_get_by_name(dev, "ahb", &priv->clk_ahb); + if (ret) + ret = PTR_ERR(&priv->clk_ahb); + + ret = clk_get_by_name(dev, "ptp", &priv->clk_ptp); + if (ret) + dev_dbg(dev, "Warning: failed to get ptp clk\n"); + + ret = clk_get_by_name(dev, "enet_out", &priv->clk_enet_out); + if (ret) + dev_dbg(dev, "Warning: failed to get enet_out clk\n"); +#endif + /* TODO * Need to get the reset-gpio and related properties from DT * and implemet the enet reset code on .probe call diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 3b935afe2c..78899e7603 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -253,6 +253,12 @@ struct fec_priv { #ifdef CONFIG_DM_ETH u32 interface; + +#if CONFIG_IS_ENABLED(CLK) + struct clk clk_ahb; + struct clk clk_ptp; + struct clk clk_enet_out; +#endif #endif }; -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
