From: Shreenidhi Shedi <[email protected]> These macros are not required anymore. These will be taken from configuration file.
Signed-off-by: Shreenidhi Shedi <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- Changes in v3: - Fix commit message Changes in v2: - Added appropriate commit message. Changes in v1: - Removed reduntant macros. board/xilinx/microblaze-generic/xparameters.h | 4 ---- include/configs/microblaze-generic.h | 10 ---------- 2 files changed, 14 deletions(-) diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h index 57998edba472..01116d827c63 100644 --- a/board/xilinx/microblaze-generic/xparameters.h +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -19,7 +19,3 @@ /* Flash Memory is FLASH_2Mx32 */ #define XILINX_FLASH_START 0x2c000000 #define XILINX_FLASH_SIZE 0x00800000 - -/* Watchdog IP is wxi_timebase_wdt_0 */ -#define XILINX_WATCHDOG_BASEADDR 0x50000000 -#define XILINX_WATCHDOG_IRQ 1 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 7f16700d4f13..6a049cf2af6b 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -43,16 +43,6 @@ # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif -/* watchdog */ -#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ) -# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR -# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ -# ifndef CONFIG_SPL_BUILD -# define CONFIG_HW_WATCHDOG -# define CONFIG_XILINX_TB_WATCHDOG -# endif -#endif - #define CONFIG_SYS_MALLOC_LEN 0xC0000 /* Stack location before relocation */ -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
