On 18.7.2018 09:41, Luis Araneda wrote:
> Disable the use of function zynq_loadfs when compiling
> the driver for the SPL, as the following filesystem
> functions are not found by the linker:
> - fs_set_blk_dev
> - fs_read
> - fs_set_blk_dev
> - fs_read
> - fs_read
>
> Signed-off-by: Luis Araneda <luaran...@gmail.com>
> ---
> drivers/fpga/zynqpl.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c
> index fd37d18c7f..8e49c7010e 100644
> --- a/drivers/fpga/zynqpl.c
> +++ b/drivers/fpga/zynqpl.c
> @@ -410,7 +410,7 @@ static int zynq_load(xilinx_desc *desc, const void *buf,
> size_t bsize,
> return FPGA_SUCCESS;
> }
>
> -#if defined(CONFIG_CMD_FPGA_LOADFS)
> +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
> static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
> fpga_fs_info *fsinfo)
> {
> @@ -493,7 +493,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void
> *buf, size_t bsize,
>
> struct xilinx_fpga_op zynq_op = {
> .load = zynq_load,
> -#if defined(CONFIG_CMD_FPGA_LOADFS)
> +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
> .loadfs = zynq_loadfs,
> #endif
> };
>
This looks good.
M
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
