From: Shreenidhi Shedi <[email protected]>

Xilinx Axi wdt driver conversion to driver model & Kconfig update
for the same.

Signed-off-by: Shreenidhi Shedi <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
---

Changes in v4:
- Fix Kconfig typo - by sjg
- Use debug instead of puts in drivers - by sjg
- Use EBUSY instead of -1 - by sjg

Changes in v3:
 - Fix commit message
 - s/Axi/AXI
 - Use platdata instead of private data.
 - Remove \n from wdt reset to catch logs
 - Add debug to wdt_start

Changes in v2:
 - Rectified print message
 - Removed stop instruction from probe

Changes in v1:
 - Xilinx Axi wdt driver conversion to DM initial version

 drivers/watchdog/Kconfig         |   8 +++
 drivers/watchdog/xilinx_tb_wdt.c | 111 ++++++++++++++++++++++++++++++---------
 2 files changed, 93 insertions(+), 26 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 148c6a0d687c..d545b3e00072 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -103,4 +103,12 @@ config WDT_CDNS
           Select this to enable Cadence watchdog timer, which can be found on 
some
           Xilinx Microzed Platform.
 
+config XILINX_TB_WATCHDOG
+       bool "Xilinx Axi watchdog timer support"
+       depends on WDT
+       imply WATCHDOG
+       help
+          Select this to enable Xilinx Axi watchdog timer, which can be found 
on some
+          Xilinx Microblaze Platforms.
+
 endmenu
diff --git a/drivers/watchdog/xilinx_tb_wdt.c b/drivers/watchdog/xilinx_tb_wdt.c
index 2274123e4919..929c8e60d37c 100644
--- a/drivers/watchdog/xilinx_tb_wdt.c
+++ b/drivers/watchdog/xilinx_tb_wdt.c
@@ -1,13 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (c) 2011-2013 Xilinx Inc.
+ * Xilinx AXI platforms watchdog timer driver.
+ *
+ * Author(s):  Michal Simek <[email protected]>
+ *             Shreenidhi Shedi <[email protected]>
+ *
+ * Copyright (c) 2011-2018 Xilinx Inc.
  */
 
 #include <common.h>
-#include <asm/io.h>
-#include <asm/microblaze_intc.h>
-#include <asm/processor.h>
-#include <watchdog.h>
+#include <dm.h>
+#include <wdt.h>
+#include <linux/io.h>
 
 #define XWT_CSR0_WRS_MASK      0x00000008 /* Reset status Mask */
 #define XWT_CSR0_WDS_MASK      0x00000004 /* Timer state Mask */
@@ -20,49 +24,104 @@ struct watchdog_regs {
        u32 tbr; /* 0x8 */
 };
 
-static struct watchdog_regs *watchdog_base =
-                       (struct watchdog_regs *)CONFIG_WATCHDOG_BASEADDR;
+struct xlnx_wdt_platdata {
+       bool enable_once;
+       struct watchdog_regs *regs;
+};
 
-void hw_watchdog_reset(void)
+static int xlnx_wdt_reset(struct udevice *dev)
 {
        u32 reg;
+       struct xlnx_wdt_platdata *platdata = dev_get_platdata(dev);
+
+       debug("%s ", __func__);
 
        /* Read the current contents of TCSR0 */
-       reg = readl(&watchdog_base->twcsr0);
+       reg = readl(&platdata->regs->twcsr0);
 
        /* Clear the watchdog WDS bit */
        if (reg & (XWT_CSR0_EWDT1_MASK | XWT_CSRX_EWDT2_MASK))
-               writel(reg | XWT_CSR0_WDS_MASK, &watchdog_base->twcsr0);
+               writel(reg | XWT_CSR0_WDS_MASK, &platdata->regs->twcsr0);
+
+       return 0;
 }
 
-void hw_watchdog_disable(void)
+static int xlnx_wdt_stop(struct udevice *dev)
 {
        u32 reg;
+       struct xlnx_wdt_platdata *platdata = dev_get_platdata(dev);
+
+       if (platdata->enable_once) {
+               debug("Can't stop Xilinx watchdog.\n");
+               return -EBUSY;
+       }
 
        /* Read the current contents of TCSR0 */
-       reg = readl(&watchdog_base->twcsr0);
+       reg = readl(&platdata->regs->twcsr0);
+
+       writel(reg & ~XWT_CSR0_EWDT1_MASK, &platdata->regs->twcsr0);
+       writel(~XWT_CSRX_EWDT2_MASK, &platdata->regs->twcsr1);
 
-       writel(reg & ~XWT_CSR0_EWDT1_MASK, &watchdog_base->twcsr0);
-       writel(~XWT_CSRX_EWDT2_MASK, &watchdog_base->twcsr1);
+       debug("Watchdog disabled!\n");
 
-       puts("Watchdog disabled!\n");
+       return 0;
 }
 
-static void hw_watchdog_isr(void *arg)
+static int xlnx_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
 {
-       hw_watchdog_reset();
+       struct xlnx_wdt_platdata *platdata = dev_get_platdata(dev);
+
+       debug("%s:\n", __func__);
+
+       writel((XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK | XWT_CSR0_EWDT1_MASK),
+              &platdata->regs->twcsr0);
+
+       writel(XWT_CSRX_EWDT2_MASK, &platdata->regs->twcsr1);
+
+       return 0;
 }
 
-void hw_watchdog_init(void)
+static int xlnx_wdt_probe(struct udevice *dev)
 {
-       int ret;
+       debug("%s: Probing wdt%u\n", __func__, dev->seq);
 
-       writel((XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK | XWT_CSR0_EWDT1_MASK),
-              &watchdog_base->twcsr0);
-       writel(XWT_CSRX_EWDT2_MASK, &watchdog_base->twcsr1);
+       return 0;
+}
 
-       ret = install_interrupt_handler(CONFIG_WATCHDOG_IRQ,
-                                               hw_watchdog_isr, NULL);
-       if (ret)
-               puts("Watchdog IRQ registration failed.");
+static int xlnx_wdt_ofdata_to_platdata(struct udevice *dev)
+{
+       struct xlnx_wdt_platdata *platdata = dev_get_platdata(dev);
+
+       platdata->regs = (struct watchdog_regs *)dev_read_addr(dev);
+       if (IS_ERR(platdata->regs))
+               return PTR_ERR(platdata->regs);
+
+       platdata->enable_once = dev_read_u32_default(dev,
+                                                    "xlnx,wdt-enable-once", 0);
+
+       debug("%s: wdt-enable-once %d\n", __func__, platdata->enable_once);
+
+       return 0;
 }
+
+static const struct wdt_ops xlnx_wdt_ops = {
+       .start = xlnx_wdt_start,
+       .reset = xlnx_wdt_reset,
+       .stop = xlnx_wdt_stop,
+};
+
+static const struct udevice_id xlnx_wdt_ids[] = {
+       { .compatible = "xlnx,xps-timebase-wdt-1.00.a", },
+       { .compatible = "xlnx,xps-timebase-wdt-1.01.a", },
+       {},
+};
+
+U_BOOT_DRIVER(xlnx_wdt) = {
+       .name = "xlnx_wdt",
+       .id = UCLASS_WDT,
+       .of_match = xlnx_wdt_ids,
+       .probe = xlnx_wdt_probe,
+       .platdata_auto_alloc_size = sizeof(struct xlnx_wdt_platdata),
+       .ofdata_to_platdata = xlnx_wdt_ofdata_to_platdata,
+       .ops = &xlnx_wdt_ops,
+};
-- 
1.9.1

_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot

Reply via email to