On Mon, Jun 25, 2018 at 6:32 PM, Jagan Teki <ja...@amarulasolutions.com> wrote: > On Mon, Jun 25, 2018 at 6:19 PM, Icenowy Zheng <icen...@aosc.io> wrote: >> >> >> 于 2018年6月25日 GMT+08:00 下午8:40:21, Jagan Teki <ja...@amarulasolutions.com> 写到: >>>On Mon, Jun 25, 2018 at 4:07 PM, Icenowy Zheng <icen...@aosc.io> wrote: >>>> This patch trys to add support for Allwinner H6 SoC to U-Boot. >>>> >>>> Allwinner H6 is a quite new Allwinner SoC, with several parts changed >>>a >>>> lot (memory map, DRAM controller, CCU, so on). The position which SPL >>>> will be loaded (SRAM A1) also changed to 0x20000. >>>> >>>> The Pine H64 board support comes with this patchset, as this is the >>>> first H6 board that I can get (being early bird). >>>> >>>> Icenowy Zheng (13): >>>> sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS >>>> sunxi: add basical memory map definitions of H6 SoC >>>> sunxi: change RMR64's RVBAR address for H6 >>>> sunxi: change ATF position for H6 >>>> sunxi: add config for SPL at 0x20000 on H6 >>>> sunxi: change GIC address on H6 >>>> sunxi: add clock code for H6 >>>> sunxi: use sun6i-style watchdog for H6 >>>> sunxi: add UART0 setup for H6 >>>> sunxi: add MMC support for H6 >>>> sunxi: add DRAM support to H6 >>>> sunxi: add support for Allwinner H6 SoC >>>> sunxi: add support for Pine H64 board >>> >>>is it on top of master? unable to apply for testing on master, point >>>me the branch would help. >> >> sunxi/next. > > please send it, on top of master
Are you planning to send v2, if so please rebase it on master. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
