Hi On Wed, Aug 1, 2018 at 9:08 PM, Saeed Abdoli <saeed2...@gmail.com> wrote: > Hi Michael > Thank you for your quick response. > Can you please tell me how to solve the problem. Where can I change the > relocation address, in kernel config or somewhere else? >
If you not top-post and keep it posted it's better. What is your its file for generate fit-image? Michael > Regards > Saeed > > On Wed, 1 Aug 2018, 11:25 p.m. Michael Nazzareno Trimarchi, > <mich...@amarulasolutions.com> wrote: >> >> Hi >> >> On Wed, Aug 1, 2018 at 8:47 PM, Saeed Abdoli <saeed2...@gmail.com> wrote: >> > Hello >> > I am working on a project in which I need to boot a customized linux >> > kernel >> > on my board. The board components are stm32f429 processor, 8Mbyte SDRAM >> > and >> > 32Mbyte flash memory which are connected to the processer via FMC. I've >> > booted u-boot on the internal flash of the processor and I've installed >> > the >> > linux image (networking.uImage) which is provided by EMCRAFT using TFTP >> > successfully. Then I tried to build my own linux image by editing the >> > example provided by EMCRAFT (rootfs). But when I build the image and try >> > to >> > boot it, the processor can not boot the image and it resets >> > unexpectedly. >> > This is the message u-boot shows when trying to boot the image: >> > ## Booting kernel from Legacy Image at d0007fc0 ... >> > Image Name: Linux-4.2.0 >> > Image Type: ARM Linux Multi-File Image (uncompressed) >> > Data Size: 3945195 Bytes = 3.8 MB >> > Load Address: d0008000 >> > Entry Point: d0008001 >> > Contents: >> > Image 0: 3932720 Bytes = 3.8 MB >> > Image 1: 12463 Bytes = 12.2 kB >> > Verifying Checksum ... OK >> > ## Flattened Device Tree from multi component Image at D0007FC0 >> > Booting using the fdt at 0xd03c823c >> > Loading Multi-File Image ... OK >> > OK >> > WARNING: legacy format multi component image overwritten >> > Loading Device Tree to d07f9000, end d07ff0ae ... OK >> > >> > Starting kernel ... >> > >> > After this message the processor resets. >> > Can you please tell me what is wrong? >> > >> >> > WARNING: legacy format multi component image overwritten >> > Loading Device Tree to d07f9000, end d07ff0ae ... OK >> >> Problem look like relocation address of fit image >> >> Michael >> >> > Regards >> > _______________________________________________ >> > U-Boot mailing list >> > U-Boot@lists.denx.de >> > https://lists.denx.de/listinfo/u-boot >> >> >> >> -- >> | Michael Nazzareno Trimarchi Amarula Solutions BV | >> | COO - Founder Cruquiuskade 47 | >> | +31(0)851119172 Amsterdam 1018 AM NL | >> | [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot