Hi Andreas, On 1.8.2018 00:00, Andreas Galauner wrote: > This change adds the necessary /chosen/stdout-path to the device tree > for the Avnet Picozed boards. This node is mandatory for the SPL. Without > it the board resets in a loop without any output. The change also adds > the USB, QSPI and Ethernet MAC nodes of the corresponding devices present > on the board. > > Signed-off-by: Andreas Galauner <[email protected]> > --- > arch/arm/dts/zynq-picozed.dts | 40 +++++++++++++++++++++++++++++++++-- > 1 file changed, 38 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.dts > index dea6a422c3..db5bb8a6fe 100644 > --- a/arch/arm/dts/zynq-picozed.dts > +++ b/arch/arm/dts/zynq-picozed.dts > @@ -14,13 +14,33 @@ > aliases { > serial0 = &uart1; > spi0 = &qspi; > - mmc0 = &sdhci1; > + mmc0 = &sdhci0; > + mmc1 = &sdhci1; > }; > > memory@0 { > device_type = "memory"; > reg = <0 0x40000000>; > }; > + > + chosen { > + bootargs = "earlyprintk"; > + stdout-path = "serial0:115200n8"; > + }; > + > + usb_phy0: phy0 { > + compatible = "usb-nop-xceiv"; > + #phy-cells = <0>; > + }; > +}; > + > +&clkc { > + ps-clk-frequency = <33333333>; > +}; > + > +&qspi { > + u-boot,dm-pre-reloc; > + status = "okay"; > }; > > &uart1 { > @@ -28,7 +48,17 @@ > status = "okay"; > }; > > -&qspi { > +&gem0 { > + status = "okay"; > + phy-mode = "rgmii-id"; > + phy-handle = <ðernet_phy>; > + > + ethernet_phy: ethernet-phy@0 { > + reg = <0>; > + }; > +}; > + > +&sdhci0 { > u-boot,dm-pre-reloc; > status = "okay"; > }; > @@ -37,3 +67,9 @@ > u-boot,dm-pre-reloc; > status = "okay"; > }; > + > +&usb0 { > + status = "okay"; > + dr_mode = "host"; > + usb-phy = <&usb_phy0>; > +}; >
We have been discussing this topic some months ago here https://lists.denx.de/pipermail/u-boot/2018-May/327267.html This is a SoM. You need to do it differently because you need to describe carrier board and then include SoM dtsi. Thanks, Michal _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
