On Thu, Aug 02, 2018 at 07:47:35AM -0500, Adam Ford wrote: > Is there a maintainer for the omap_gpmc driver? Only the u-boot open > list is returned when queried. > > ./scripts/get_maintainer.pl ./drivers/mtd/nand/omap_gpmc.c > [email protected] (open list) > > I was thinking about (but not promising) adding some device tree > support to enable fetching GPMC timings from device tree and > configuring and/or re-configuring the GPMC timings based on DT > contents. > > I wanted to shoot my ideas off someone else and/or not duplicate any > work, but I am not volunteering to take over this driver. > > Mostly because the GPMC timings setup for NAND and NOR are fairly > generic for NAND/NOR, and it would be nice to optimize them a bit to > see if we could get a little faster performance when loading ramdisks > or kernels via GPMC. Some peripherals (like ethernet) use the GPMC > bus, and we have some hard-coded values, but this kind of information > can be fetched from device trees and may also yield a little bit of > optimization.
Ah, there is not a specific maintainer for the driver. -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
