On 08/05/2018 09:34 PM, Simon Goldschmidt wrote:
> If CONFIG_DEBUG_UART is enabled, correctly initialize
> the debug uart before console is initialized to debug
> early boot problems in SPL.
>
> This also changes a printf in reset_manager_gen5 to
> a debug to prevent calling into debug uart before it
> is initialized.
>
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
> ---
>
> arch/arm/mach-socfpga/reset_manager_gen5.c | 5 +++--
> arch/arm/mach-socfpga/spl_gen5.c | 6 ++++++
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-socfpga/reset_manager_gen5.c
> b/arch/arm/mach-socfpga/reset_manager_gen5.c
> index 25baef79bc..3dfa09b742 100644
> --- a/arch/arm/mach-socfpga/reset_manager_gen5.c
> +++ b/arch/arm/mach-socfpga/reset_manager_gen5.c
> @@ -89,8 +89,9 @@ void socfpga_bridges_reset(int enable)
> /* Check signal from FPGA. */
> if (!fpgamgr_test_fpga_ready()) {
> /* FPGA not ready, do nothing. We allow system to boot
> - * without FPGA ready. So, return 0 instead of error. */
> - printf("%s: FPGA not ready, aborting.\n", __func__);
> + * without FPGA ready.
> + */
> + debug("%s: FPGA not ready, aborting.\n", __func__);
This seems to be papering over some sort of problem with the debug UART.
I'd like to keep the print here, since it's a valid error, not a debug
print.
> return;
> }
>
> diff --git a/arch/arm/mach-socfpga/spl_gen5.c
> b/arch/arm/mach-socfpga/spl_gen5.c
> index 0d5526656d..0e685f6ee5 100644
> --- a/arch/arm/mach-socfpga/spl_gen5.c
> +++ b/arch/arm/mach-socfpga/spl_gen5.c
> @@ -20,6 +20,7 @@
> #include <asm/arch/scu.h>
> #include <asm/arch/nic301.h>
> #include <asm/sections.h>
> +#include <debug_uart.h>
> #include <fdtdec.h>
> #include <watchdog.h>
>
> @@ -153,6 +154,11 @@ void board_init_f(ulong dummy)
> /* unfreeze / thaw all IO banks */
> sys_mgr_frzctrl_thaw_req();
>
> +#ifdef CONFIG_DEBUG_UART
> + socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
> + debug_uart_init();
> +#endif
> +
> ret = spl_early_init();
> if (ret) {
> debug("spl_early_init() failed: %d\n", ret);
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
