Thanks for your advise, I compile with -mrelocatable. If I remove this flag, 
Error is shown:

ERROR: Your compiler doesn't generate .fixup sections!

My host gcc is  gcc 4.1.2 20080704 (Red Hat 4.1.2-44),
I try different toolchain:
powerpc-unknown-linux-gnu-gcc  gcc version 4.4.3 (crosstool-NG-1.6.0)
ppc_82xx-gcc gcc version 4.2.2   from ELDK
powerpc-603-linux-gnu-gcc gcc version 4.1.0 from crosstool 0.43

The problem is still there    : (       
----------------------------------------------------
--JRJR


> Subject: Re: [U-Boot] Instructions in TEXT section can not load data from 
> other       section
> To: [email protected]
> CC: [email protected]
> From: [email protected]
> Date: Tue, 16 Mar 2010 09:50:42 +0100
> 
> >
> > Hi, everyone.
> >
> >  I have got a problem when I porting U-BOOT to my board
> >
> > with MPC8247. My configuration file is based on the MPC8260ADS_config.
> >
> > The problem is : The instruction in TEXT section can not load data in
> >
> > other (DATA) sections. It seems there is a relocation to the data section .
> >
> > For example:   If I use
> >
> >     for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
> >         if ((*init_fnc_ptr) () != 0) {
> >             hang ();
> >         }
> >     }
> >
> > I can't jump to functions in  init_sequence[]  ;
> >
> > If I called functions such as    get_clocks()  in board_init_f  , it works 
> > fine.
> >
> > So the code in board_init_f can not load address in init_sequence[] , 
> > because
> >
> > init_sequence[]  is out of TEXT section.
> >
> > The same thing happens with iop_conf_tab[][], and strings used by "puts".
> >
> > Anyone there has the same problem? Or know the point? Pls help!
> 
> Yes, that is a relocation problem. Do you compile with -mrelocatable?
> If so, you might have a broken toolchain that don't produce .fixups
> 
>     jocke
> 
                                          
_________________________________________________________________
SkyDrive电子画册,带你领略精彩照片,分享“美”时“美”刻!
http://www.windowslive.cn/campaigns/e-magazine/ngmchina/?a=c
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to