On Fri, Aug 10, 2018 at 2:58 PM Adam Ford <aford...@gmail.com> wrote:
>
> On Fri, Aug 10, 2018 at 7:42 AM Jagan Teki <ja...@amarulasolutions.com> wrote:
> >
> > On Fri, Aug 10, 2018 at 3:50 PM, Adam Ford <aford...@gmail.com> wrote:
> > > On Fri, Aug 10, 2018 at 12:14 AM Jagan Teki <ja...@amarulasolutions.com>
> > > wrote:
> > >>
> > >> On Wed, Aug 8, 2018 at 6:47 PM, Adam Ford <aford...@gmail.com> wrote:
> > >> > On Tue, Aug 7, 2018 at 1:29 AM Jagan Teki <ja...@amarulasolutions.com>
> > >> > wrote:
> > >> >>
> > >> >> davinci_spi now support dt along with platform data,
> > >> >> respective boards need to switch into dm for the same.
> > >> >>
> > >> >> Cc: Adam Ford <aford...@gmail.com>
> > >> >> Cc: Vitaly Andrianov <vita...@ti.com>
> > >> >> Cc: Stefano Babic <sba...@denx.de>
> > >> >> Cc: Peter Howard <phow...@gme.net.au>
> > >> >> Cc: Tom Rini <tr...@konsulko.com>
> > >> >> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> > >> >> ---
> > >> >> drivers/spi/Kconfig | 12 +-
> > >> >> drivers/spi/davinci_spi.c | 289
> > >> >> +++++++------------------
> > >> >> include/dm/platform_data/spi_davinci.h | 15 ++
> > >> >> 3 files changed, 97 insertions(+), 219 deletions(-)
> > >> >> create mode 100644 include/dm/platform_data/spi_davinci.h
> > >> >>
> > >> >> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> > >> >> index d046e919b4..18ebff0231 100644
> > >> >> --- a/drivers/spi/Kconfig
> > >> >> +++ b/drivers/spi/Kconfig
> > >> >> @@ -80,6 +80,12 @@ config CADENCE_QSPI
> > >> >> used to access the SPI NOR flash on platforms embedding this
> > >> >> Cadence IP core.
> > >> >>
> > >> >> +config DAVINCI_SPI
> > >> >> + bool "Davinci & Keystone SPI driver"
> > >> >> + depends on ARCH_DAVINCI || ARCH_KEYSTONE
> > >> >> + help
> > >> >> + Enable the Davinci SPI driver
> > >> >> +
> > >> >> config DESIGNWARE_SPI
> > >> >> bool "Designware SPI driver"
> > >> >> help
> > >> >> @@ -281,12 +287,6 @@ config FSL_QSPI
> > >> >> used to access the SPI NOR flash on platforms embedding this
> > >> >> Freescale IP core.
> > >> >>
> > >> >> -config DAVINCI_SPI
> > >> >> - bool "Davinci & Keystone SPI driver"
> > >> >> - depends on ARCH_DAVINCI || ARCH_KEYSTONE
> > >> >> - help
> > >> >> - Enable the Davinci SPI driver
> > >> >> -
> > >> >> config SH_SPI
> > >> >> bool "SuperH SPI driver"
> > >> >> help
> > >> >> diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
> > >> >> index a822858323..5007e6c618 100644
> > >> >> --- a/drivers/spi/davinci_spi.c
> > >> >> +++ b/drivers/spi/davinci_spi.c
> > >> >> @@ -14,6 +14,7 @@
> > >> >> #include <asm/io.h>
> > >> >> #include <asm/arch/hardware.h>
> > >> >> #include <dm.h>
> > >> >> +#include <dm/platform_data/spi_davinci.h>
> > >> >>
> > >> >> /* SPIGCR0 */
> > >> >> #define SPIGCR0_SPIENA_MASK 0x1
> > >> >> @@ -118,9 +119,6 @@ struct davinci_spi_regs {
> > >> >>
> > >> >> /* davinci spi slave */
> > >> >> struct davinci_spi_slave {
> > >> >> -#ifndef CONFIG_DM_SPI
> > >> >> - struct spi_slave slave;
> > >> >> -#endif
> > >> >> struct davinci_spi_regs *regs;
> > >> >> unsigned int freq; /* current SPI bus frequency */
> > >> >> unsigned int mode; /* current SPI mode used */
> > >> >> @@ -240,11 +238,43 @@ static int davinci_spi_read_write(struct
> > >> >> davinci_spi_slave *ds, unsigned
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> +static int davinci_spi_set_speed(struct udevice *bus, uint max_hz)
> > >> >> +{
> > >> >> + struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >>
> > >> >> -static int __davinci_spi_claim_bus(struct davinci_spi_slave *ds, int
> > >> >> cs)
> > >> >> + debug("%s speed %u\n", __func__, max_hz);
> > >> >> + if (max_hz > CONFIG_SYS_SPI_CLK / 2)
> > >> >> + return -EINVAL;
> > >> >> +
> > >> >> + ds->freq = max_hz;
> > >> >> +
> > >> >> + return 0;
> > >> >> +}
> > >> >> +
> > >> >> +static int davinci_spi_set_mode(struct udevice *bus, uint mode)
> > >> >> +{
> > >> >> + struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> +
> > >> >> + debug("%s mode %u\n", __func__, mode);
> > >> >> + ds->mode = mode;
> > >> >> +
> > >> >> + return 0;
> > >> >> +}
> > >> >> +
> > >> >> +static int davinci_spi_claim_bus(struct udevice *dev)
> > >> >> {
> > >> >> + struct dm_spi_slave_platdata *slave_plat =
> > >> >> + dev_get_parent_platdata(dev);
> > >> >> + struct udevice *bus = dev->parent;
> > >> >> + struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> unsigned int mode = 0, scalar;
> > >> >>
> > >> >> + if (slave_plat->cs >= ds->num_cs) {
> > >> >> + printf("Invalid SPI chipselect\n");
> > >> >> + return -EINVAL;
> > >> >> + }
> > >> >> + ds->half_duplex = slave_plat->mode & SPI_PREAMBLE;
> > >> >> +
> > >> >> /* Enable the SPI hardware */
> > >> >> writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
> > >> >> udelay(1000);
> > >> >> @@ -254,7 +284,7 @@ static int __davinci_spi_claim_bus(struct
> > >> >> davinci_spi_slave *ds, int cs)
> > >> >> writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK,
> > >> >> &ds->regs->gcr1);
> > >> >>
> > >> >> /* CS, CLK, SIMO and SOMI are functional pins */
> > >> >> - writel(((1 << cs) | SPIPC0_CLKFUN_MASK |
> > >> >> + writel(((1 << slave_plat->cs) | SPIPC0_CLKFUN_MASK |
> > >> >> SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK),
> > >> >> &ds->regs->pc0);
> > >> >>
> > >> >> /* setup format */
> > >> >> @@ -292,20 +322,32 @@ static int __davinci_spi_claim_bus(struct
> > >> >> davinci_spi_slave *ds, int cs)
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> -static int __davinci_spi_release_bus(struct davinci_spi_slave *ds)
> > >> >> +static int davinci_spi_release_bus(struct udevice *dev)
> > >> >> {
> > >> >> + struct davinci_spi_slave *ds = dev_get_priv(dev->parent);
> > >> >> +
> > >> >> /* Disable the SPI hardware */
> > >> >> writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
> > >> >>
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> -static int __davinci_spi_xfer(struct davinci_spi_slave *ds,
> > >> >> - unsigned int bitlen, const void *dout, void *din,
> > >> >> - unsigned long flags)
> > >> >> +static int davinci_spi_xfer(struct udevice *dev, unsigned int bitlen,
> > >> >> + const void *dout, void *din,
> > >> >> + unsigned long flags)
> > >> >> {
> > >> >> + struct dm_spi_slave_platdata *slave =
> > >> >> + dev_get_parent_platdata(dev);
> > >> >> + struct udevice *bus = dev->parent;
> > >> >> + struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> unsigned int len;
> > >> >>
> > >> >> + if (slave->cs >= ds->num_cs) {
> > >> >> + printf("Invalid SPI chipselect\n");
> > >> >> + return -EINVAL;
> > >> >> + }
> > >> >> + ds->cur_cs = slave->cs;
> > >> >> +
> > >> >> if (bitlen == 0)
> > >> >> /* Finish any previously submitted transfers */
> > >> >> goto out;
> > >> >> @@ -339,240 +381,61 @@ out:
> > >> >> u8 dummy = 0;
> > >> >> davinci_spi_write(ds, 1, &dummy, flags);
> > >> >> }
> > >> >> - return 0;
> > >> >> -}
> > >> >> -
> > >> >> -#ifndef CONFIG_DM_SPI
> > >> >> -
> > >> >> -static inline struct davinci_spi_slave *to_davinci_spi(struct
> > >> >> spi_slave *slave)
> > >> >> -{
> > >> >> - return container_of(slave, struct davinci_spi_slave, slave);
> > >> >> -}
> > >> >> -
> > >> >> -int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> > >> >> -{
> > >> >> - int ret = 0;
> > >> >> -
> > >> >> - switch (bus) {
> > >> >> - case SPI0_BUS:
> > >> >> - if (cs < SPI0_NUM_CS)
> > >> >> - ret = 1;
> > >> >> - break;
> > >> >> -#ifdef CONFIG_SYS_SPI1
> > >> >> - case SPI1_BUS:
> > >> >> - if (cs < SPI1_NUM_CS)
> > >> >> - ret = 1;
> > >> >> - break;
> > >> >> -#endif
> > >> >> -#ifdef CONFIG_SYS_SPI2
> > >> >> - case SPI2_BUS:
> > >> >> - if (cs < SPI2_NUM_CS)
> > >> >> - ret = 1;
> > >> >> - break;
> > >> >> -#endif
> > >> >> - default:
> > >> >> - /* Invalid bus number. Do nothing */
> > >> >> - break;
> > >> >> - }
> > >> >> - return ret;
> > >> >> -}
> > >> >> -
> > >> >> -void spi_cs_activate(struct spi_slave *slave)
> > >> >> -{
> > >> >> - /* do nothing */
> > >> >> -}
> > >> >> -
> > >> >> -void spi_cs_deactivate(struct spi_slave *slave)
> > >> >> -{
> > >> >> - /* do nothing */
> > >> >> -}
> > >> >> -
> > >> >> -void spi_init(void)
> > >> >> -{
> > >> >> - /* do nothing */
> > >> >> -}
> > >> >> -
> > >> >> -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> > >> >> - unsigned int max_hz, unsigned int mode)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds;
> > >> >> -
> > >> >> - if (!spi_cs_is_valid(bus, cs))
> > >> >> - return NULL;
> > >> >> -
> > >> >> - ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs);
> > >> >> - if (!ds)
> > >> >> - return NULL;
> > >> >> -
> > >> >> - switch (bus) {
> > >> >> - case SPI0_BUS:
> > >> >> - ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
> > >> >> - break;
> > >> >> -#ifdef CONFIG_SYS_SPI1
> > >> >> - case SPI1_BUS:
> > >> >> - ds->regs = (struct davinci_spi_regs *)SPI1_BASE;
> > >> >> - break;
> > >> >> -#endif
> > >> >> -#ifdef CONFIG_SYS_SPI2
> > >> >> - case SPI2_BUS:
> > >> >> - ds->regs = (struct davinci_spi_regs *)SPI2_BASE;
> > >> >> - break;
> > >> >> -#endif
> > >> >> - default: /* Invalid bus number */
> > >> >> - return NULL;
> > >> >> - }
> > >> >> -
> > >> >> - ds->freq = max_hz;
> > >> >> - ds->mode = mode;
> > >> >> -
> > >> >> - return &ds->slave;
> > >> >> -}
> > >> >> -
> > >> >> -void spi_free_slave(struct spi_slave *slave)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = to_davinci_spi(slave);
> > >> >> -
> > >> >> - free(ds);
> > >> >> -}
> > >> >> -
> > >> >> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
> > >> >> - const void *dout, void *din, unsigned long flags)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = to_davinci_spi(slave);
> > >> >> -
> > >> >> - ds->cur_cs = slave->cs;
> > >> >> -
> > >> >> - return __davinci_spi_xfer(ds, bitlen, dout, din, flags);
> > >> >> -}
> > >> >> -
> > >> >> -int spi_claim_bus(struct spi_slave *slave)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = to_davinci_spi(slave);
> > >> >> -
> > >> >> -#ifdef CONFIG_SPI_HALF_DUPLEX
> > >> >> - ds->half_duplex = true;
> > >> >> -#else
> > >> >> - ds->half_duplex = false;
> > >> >> -#endif
> > >> >> - return __davinci_spi_claim_bus(ds, ds->slave.cs);
> > >> >> -}
> > >> >> -
> > >> >> -void spi_release_bus(struct spi_slave *slave)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = to_davinci_spi(slave);
> > >> >> -
> > >> >> - __davinci_spi_release_bus(ds);
> > >> >> -}
> > >> >> -
> > >> >> -#else
> > >> >> -static int davinci_spi_set_speed(struct udevice *bus, uint max_hz)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> -
> > >> >> - debug("%s speed %u\n", __func__, max_hz);
> > >> >> - if (max_hz > CONFIG_SYS_SPI_CLK / 2)
> > >> >> - return -EINVAL;
> > >> >> -
> > >> >> - ds->freq = max_hz;
> > >> >>
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> -static int davinci_spi_set_mode(struct udevice *bus, uint mode)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> -
> > >> >> - debug("%s mode %u\n", __func__, mode);
> > >> >> - ds->mode = mode;
> > >> >> -
> > >> >> - return 0;
> > >> >> -}
> > >> >> -
> > >> >> -static int davinci_spi_claim_bus(struct udevice *dev)
> > >> >> -{
> > >> >> - struct dm_spi_slave_platdata *slave_plat =
> > >> >> - dev_get_parent_platdata(dev);
> > >> >> - struct udevice *bus = dev->parent;
> > >> >> - struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> -
> > >> >> - if (slave_plat->cs >= ds->num_cs) {
> > >> >> - printf("Invalid SPI chipselect\n");
> > >> >> - return -EINVAL;
> > >> >> - }
> > >> >> - ds->half_duplex = slave_plat->mode & SPI_PREAMBLE;
> > >> >> -
> > >> >> - return __davinci_spi_claim_bus(ds, slave_plat->cs);
> > >> >> -}
> > >> >> -
> > >> >> -static int davinci_spi_release_bus(struct udevice *dev)
> > >> >> -{
> > >> >> - struct davinci_spi_slave *ds = dev_get_priv(dev->parent);
> > >> >> -
> > >> >> - return __davinci_spi_release_bus(ds);
> > >> >> -}
> > >> >> +static const struct dm_spi_ops davinci_spi_ops = {
> > >> >> + .claim_bus = davinci_spi_claim_bus,
> > >> >> + .release_bus = davinci_spi_release_bus,
> > >> >> + .xfer = davinci_spi_xfer,
> > >> >> + .set_speed = davinci_spi_set_speed,
> > >> >> + .set_mode = davinci_spi_set_mode,
> > >> >> +};
> > >> >>
> > >> >> -static int davinci_spi_xfer(struct udevice *dev, unsigned int bitlen,
> > >> >> - const void *dout, void *din,
> > >> >> - unsigned long flags)
> > >> >> +static int davinci_spi_probe(struct udevice *bus)
> > >> >> {
> > >> >> - struct dm_spi_slave_platdata *slave =
> > >> >> - dev_get_parent_platdata(dev);
> > >> >> - struct udevice *bus = dev->parent;
> > >> >> struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> + struct davinci_spi_platdata *plat = bus->platdata;
> > >> >> + ds->regs = plat->regs;
> > >> >> + ds->num_cs = plat->num_cs;
> > >> >>
> > >> >> - if (slave->cs >= ds->num_cs) {
> > >> >> - printf("Invalid SPI chipselect\n");
> > >> >> - return -EINVAL;
> > >> >> - }
> > >> >> - ds->cur_cs = slave->cs;
> > >> >> -
> > >> >> - return __davinci_spi_xfer(ds, bitlen, dout, din, flags);
> > >> >> -}
> > >> >> -
> > >> >> -static int davinci_spi_probe(struct udevice *bus)
> > >> >> -{
> > >> >> - /* Nothing to do */
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> > >> >
> > >> > Looking at other drivers, I wonder if this should be
> > >> > +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> > >> >
> > >> >
> > >> >> static int davinci_ofdata_to_platadata(struct udevice *bus)
> > >> >> {
> > >> >> - struct davinci_spi_slave *ds = dev_get_priv(bus);
> > >> >> - const void *blob = gd->fdt_blob;
> > >> >> - int node = dev_of_offset(bus);
> > >> >> + struct davinci_spi_platdata *plat = bus->platdata;
> > >> >> + fdt_addr_t addr;
> > >> >>
> > >> >> - ds->regs = devfdt_map_physmem(bus, sizeof(struct
> > >> >> davinci_spi_regs));
> > >> >> - if (!ds->regs) {
> > >> >> - printf("%s: could not map device address\n",
> > >> >> __func__);
> > >> >> + addr = devfdt_get_addr(bus);
> > >> >> + if (addr == FDT_ADDR_T_NONE)
> > >> >> return -EINVAL;
> > >> >> - }
> > >> >> - ds->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
> > >> >> +
> > >> >> + plat->regs = (struct davinci_spi_regs *)addr;
> > >> >> + plat->num_cs = fdtdec_get_int(gd->fdt_blob,
> > >> >> dev_of_offset(bus), "num-cs", 4);
> > >> >>
> > >> >> return 0;
> > >> >> }
> > >> >>
> > >> >> -static const struct dm_spi_ops davinci_spi_ops = {
> > >> >> - .claim_bus = davinci_spi_claim_bus,
> > >> >> - .release_bus = davinci_spi_release_bus,
> > >> >> - .xfer = davinci_spi_xfer,
> > >> >> - .set_speed = davinci_spi_set_speed,
> > >> >> - .set_mode = davinci_spi_set_mode,
> > >> >> -};
> > >> >> -
> > >> >> static const struct udevice_id davinci_spi_ids[] = {
> > >> >> { .compatible = "ti,keystone-spi" },
> > >> >> { .compatible = "ti,dm6441-spi" },
> > >> >> { .compatible = "ti,da830-spi" },
> > >> >> { }
> > >> >> };
> > >> >> +#endif
> > >> >>
> > >> >> U_BOOT_DRIVER(davinci_spi) = {
> > >> >> .name = "davinci_spi",
> > >> >> .id = UCLASS_SPI,
> > >> >> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> > >> >
> > >> > Like above, should this be:
> > >> > +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> > >> >
> > >> > With limited SPL resources, I cannot build OF_CONTROL in SPL and
> > >> > disabling OF_CONTROL in SPL doesn't build either.
> > >> > With the modification, I can build with OF_PLATDATA enabled.
> >
> > Is it possible to enable DM_SPI in SPL? da850evm_direct_nor_defconfig
> > is able to build since it has it.
>
> Enabling DM_SPI in SPL starts to grow, hence my other comments about
> SPL_OF_PLATDATA in order to make it fit into SPL.
> da850evm_direct_nor_defconfig does not enable SPL, but it does enable
> DM_SPI.
> I had to get the NOR expansion board in order to try it. I'm trying
> to get it to work now, but for some reason, I'm having difficulty
> booting the stock da850evm_direct_nor_defconfig
>
> It would be easiest if we could have both a DM_SPI and non DM_SPI
> version of the driver so it can fit into SPL or the ability to disable
> SPI in SPL. I am experimenting with the latter. Several drivers
> offer the option to be disabled in SPL, so I'm experimenting with that
> to save space in SPL.
>
I was able to verify your code works for the
da850evm_direct_nor_defconfig version which doesn't use SPL.
I spent a significant amount of time yesterday trying to get SPL to
work, but just enabling SPL and disabling
all drivers except serial, I was not able to boot, so I think
something is wrong with DM and SPL. I don't have
a debugger at home for this board, so I'll need to get one from work
to further troubleshoot.
I don't think any DA850/L138/AM1808 board uses DM in SPL, so I think
it would be best to maintain both DM
and non-DM code bases for now until we're able to support DM in SPL.
The good news is that when in U-Boot, your code seems to work just
fine. Unfortunately, it's limited to boards
which can XIP boot to NOR.
adam
> adam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
