On Thu, Mar 18, 2010 at 12:33 PM, Valentin Ecker
<[email protected]> wrote:
...
> While board initialization, serial_init() gets called, which calls the
> driver specific (hardware, etc...) init stuff. The default is that the
> default serial (in my case the SoC ns16550 ) will be initialized. So
> my extra serial port stays uninitialized because it's not default.
Did you add the CONFIG_SYS_NS16550_COM2 in your board
configuration file?
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
