On Mon, Aug 06, 2018 at 02:49:19PM +0200, Neil Armstrong wrote: > The Amlogic Meson SoCs embeds a specific Power Domain dedicated to the > Video Processing Unit. > This patch implements support for this power domain in preparation of the > future support for the Video display support in U-Boot. > > This driver will depend on changes in the clock driver to handle the setup > of the VPU and VAPB clocks configured from DT using assigned-clocks entries. > > Reviewed-by: Simon Glass <[email protected]> > Signed-off-by: Neil Armstrong <[email protected]> > --- > drivers/power/domain/Kconfig | 7 ++ > drivers/power/domain/Makefile | 1 + > drivers/power/domain/meson-gx-pwrc-vpu.c | 198 > +++++++++++++++++++++++++++++++ > 3 files changed, 206 insertions(+) > create mode 100644 drivers/power/domain/meson-gx-pwrc-vpu.c > > diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kconfig > index 7cfa761..4618847 100644 > --- a/drivers/power/domain/Kconfig > +++ b/drivers/power/domain/Kconfig > @@ -16,6 +16,13 @@ config BCM6328_POWER_DOMAIN > Enable support for manipulating BCM6345 power domains via MMIO > mapped registers. > > +config MESON_GX_VPU_POWER_DOMAIN > + bool "Enable Amlogic Meson GX VPU power domain driver" > + depends on ARCH_MESON
Hi, since the driver uses syscon_node_to_regmap() I think the Kconfig entry should also 'select SYSCON'. Beniamino _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
