Hi Tom, Jagan, Boris Brezillon <boris.brezil...@bootlin.com> wrote on Thu, 16 Aug 2018 18:58:58 +0200:
> Tom, Jagan, > > On Thu, 16 Aug 2018 17:29:58 +0200 > Miquel Raynal <miquel.ray...@bootlin.com> wrote: > > > During the last months, Boris Brezillon shared his work to support > > serial flashes within Linux. First, he delivered (and merged) a new > > layer called spi-mem. He also initiated in Linux MTD subsystem the move > > of all 'raw' NAND related code to a raw/ subdirectory, adding at the > > same time a NAND core that would be shared with all NAND devices. Then, > > he contributed a generic SPI-NAND driver, making use of this NAND core, > > as well as some vendor code to drive a few chips. > > > > On top of this work, I made some cleanups in the MTD layer and added an > > 'mtd' U-Boot command to handle all sort of MTD devices. This should > > become the default command instead of having one per flash flavor > > ('sf', 'nand', 'spi-nand' ?). > > > > The series has been tested on an Ocelot board PCB123 (VSC7514), > > featuring a Macronix SPI NAND chip. > > > > TL;DR: the series contains: > > - A few patches from Linux to resynchronize some areas of the MTD layer. > > - Various fixes and re-organization of the MTD subsystem. > > - The introduction of the SPI-mem interface. > > - The addition of the generic SPI-NAND driver (and its bindings). > > - Several SPI NAND chip drivers (Macronix, Micron, Winbond). > > - A new 'mtd' command. > > - Support for spi-nand devices in mtdparts. > > > > To test your SPI-NAND device with U-Boot simply follow these lines: > > > > > setenv mtdparts mtdparts=spi-nand0:1m(foo),-(bar) > > > ubi part bar # create a static UBI volume in the bar partition > > > mtd list # show the current MTD devices/partitions > > > > Thanks, > > Miquèl > > > > [...] > > Can we get some of those patches merged to avoid sending another > version containing more than 30 patches. Here is a list of patches which > IMO are ready to be merged: > > - 1 to 4 > - 5 and 6 if 6 is squashed in 5 > - 7 to 23 > Yes, I agree with Boris, I do not want to resend another 30+ patch series while the changes are on the last 5 only, could one of you please apply them from 1 to 23 (with 6 squashed in 5) ? Next week I will send a v7 for patches 24..31. Thanks, Miquèl _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot