On 14/08/2018 15:07, Beniamino Galvani wrote: > The reset is already handled by the designware driver using > information from device tree. > > Signed-off-by: Beniamino Galvani <[email protected]> > --- > board/amlogic/nanopi-k2/nanopi-k2.c | 6 ------ > board/amlogic/odroid-c2/odroid-c2.c | 6 ------ > 2 files changed, 12 deletions(-) > > diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c > b/board/amlogic/nanopi-k2/nanopi-k2.c > index 339dbb81db..ae29dd6fa4 100644 > --- a/board/amlogic/nanopi-k2/nanopi-k2.c > +++ b/board/amlogic/nanopi-k2/nanopi-k2.c > @@ -30,12 +30,6 @@ int misc_init_r(void) > > meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); > > - /* Reset PHY on GPIOZ_14 */ > - clrbits_le32(GX_GPIO_EN(3), BIT(14)); > - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); > - mdelay(10); > - setbits_le32(GX_GPIO_OUT(3), BIT(14)); > - > if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { > len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, > mac_addr, EFUSE_MAC_SIZE); > diff --git a/board/amlogic/odroid-c2/odroid-c2.c > b/board/amlogic/odroid-c2/odroid-c2.c > index c47b9ce9cb..2a2755c387 100644 > --- a/board/amlogic/odroid-c2/odroid-c2.c > +++ b/board/amlogic/odroid-c2/odroid-c2.c > @@ -30,12 +30,6 @@ int misc_init_r(void) > > meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); > > - /* Reset PHY on GPIOZ_14 */ > - clrbits_le32(GX_GPIO_EN(3), BIT(14)); > - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); > - mdelay(10); > - setbits_le32(GX_GPIO_OUT(3), BIT(14)); > - > if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { > len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, > mac_addr, EFUSE_MAC_SIZE); >
Acked-by: Neil Armstrong <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
