On Tue, Aug 21, 2018 at 08:00:48PM +0530, Lokesh Vutla wrote: > Add support for Texas Instruments' K3 Generation Processor > families. [snip] > diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c > index 9c80090aa7..f48d82f051 100644 > --- a/drivers/serial/ns16550.c > +++ b/drivers/serial/ns16550.c > @@ -175,7 +175,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) > ; > > serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); > -#if defined(CONFIG_ARCH_OMAP2PLUS) > +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_ARCH_K3) > serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ > #endif > > @@ -183,7 +183,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) > serial_out(ns16550_getfcr(com_port), &com_port->fcr); > if (baud_divisor != -1) > NS16550_setbrg(com_port, baud_divisor); > -#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) > +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \ > + defined(CONFIG_ARCH_K3) > /* /16 is proper to hit 115200 with 48MHz */ > serial_out(0, &com_port->mdr1); > #endif
K3 would also be using CONFIG_OMAP_SERIAL once https://patchwork.ozlabs.org/patch/956252/ is applied (which I'll do in the next release) yes? I think 956252 needs a follow-up that changes the above hunks to be testing off CONFIG_OMAP_SERIAL instead so this part of the series just becomes changing the default y line for OMAP_SERIAL. -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
