Hi, On Wed, Aug 1, 2018 at 9:22 PM Peter Robinson <[email protected]> wrote: > > On Tue, Jul 10, 2018 at 4:04 AM, Chen-Yu Tsai <[email protected]> wrote: > > This is on a Libre Computer ALL-H3-CC H3 variant. Still running a > > bisect, but v2018.07-rc1 is a working version. From the EHCI error > > messages, I'm thinking it might be related to the USB changes lately. > > Not sure if any other SoCs (ex. A64) are broken or not at the moment. > > I'm still seeing this issue in 2018.09 RC1, what's the status of a fix for > this?
This is a bug in binutils: https://sourceware.org/bugzilla/show_bug.cgi?id=23571 It has been fixed upstream. > > See log: > > > > U-Boot SPL 2018.07 (Jul 10 2018 - 10:21:03 +0800) > > DRAM: 1024 MiB > > Trying to boot from MMC1 > > > > > > U-Boot 2018.07 (Jul 10 2018 - 10:21:03 +0800) Allwinner Technology > > > > CPU: Allwinner H3 (SUN8I 1680) > > Model: Libre Computer Board ALL-H3-CC H3 > > DRAM: 1 GiB > > MMC: SUNXI SD/MMC: 0 > > Loading Environment from FAT... Unable to use mmc 0:1... Failed (-5) > > In: serial > > Out: serial > > Err: serial > > Net: phy interface0 > > eth0: ethernet@1c30000 > > starting USB... > > USB0: USB EHCI 1.00 > > USB1: USB OHCI 1.0 > > USB2: USB EHCI 1.00 > > USB3: USB OHCI 1.0 > > USB4: USB EHCI 1.00 > > USB5: USB OHCI 1.0 > > scanning bus 0 for devices... 1 USB Device(s) found > > scanning bus 2 for devices... 1 USB Device(s) found > > scanning bus 4 for devices... 1 USB Device(s) found > > scanning usb for storage devices... 0 Storage Device(s) found > > Hit any key to stop autoboot: 0 > > switch to partitions #0, OK > > mmc0 is current device > > Scanning mmc 0:1... > > Found U-Boot script /boot/boot.scr > > 385 bytes read in 8 ms (46.9 KiB/s) > > ## Executing script at 43100000 > > 6343768 bytes read in 295 ms (20.5 MiB/s) > > 18710 bytes read in 10 ms (1.8 MiB/s) > > ## Flattened Device Tree blob at 43000000 > > Booting using the fdt blob at 0x43000000 > > EHCI failed to shut down host controller. > > EHCI failed to shut down host controller. > > EHCI failed to shut down host controller. > > Loading Device Tree to 49ff8000, end 49fff915 ... OK > > > > Starting kernel ... > > > > data abort > > pc : [<7dfadc6c>] lr : [<7df82ed7>] > > reloc pc : [<4a02bc6c>] lr : [<4a000ed7>] > > sp : 79f5ce90 ip : 79f62b8a fp : 00000003 > > r10: 7dfc3d14 r9 : 79f61ed8 r8 : 00000400 > > r7 : 00000000 r6 : 42000000 r5 : 49ff8000 r4 : 00000000 > > r3 : 49ff8000 r2 : 49ff8000 r1 : 00000000 r0 : 00000000 > > Flags: nZCv IRQs off FIQs off Mode UK6_32 > > Code: e12fff1e e52de008 fa000001 e3a00000 (e49df008) > > Resetting CPU ... > > > > resetting ... > > _______________________________________________ > > U-Boot mailing list > > [email protected] > > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
