Now that we have the pinctrl driver for Merrifield in place we can make use of it and set I2C#6 pins appropriately.
Initial configuration came from the firmware. Which quite likely has been used in the phones, where that is not part of Atom peripheral, is in use. Thus we need to override the leftover. Signed-off-by: Georgii Staroselskii <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Bin Meng <[email protected]> --- arch/x86/dts/edison.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/x86/dts/edison.dts b/arch/x86/dts/edison.dts index 1da7f54..0dd7240 100644 --- a/arch/x86/dts/edison.dts +++ b/arch/x86/dts/edison.dts @@ -85,4 +85,26 @@ compatible = "intel,reset-tangier"; u-boot,dm-pre-reloc; }; + + pinctrl { + compatible = "intel,pinctrl-tangier"; + reg = <0xff0c0000 0x8000>; + + /* + * Initial configuration came from the firmware. + * Which quite likely has been used in the phones, where I2C #8, + * that is not part of Atom peripheral, is in use. + * Thus we need to override the leftover. + */ + i2c6_scl@0 { + pad-offset = <111>; + mode-func = <1>; + protected; + }; + i2c6_sda@0 { + pad-offset = <112>; + mode-func = <1>; + protected; + }; + }; }; -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
