To prevent accidental build failures the change converts a number of NXP LPC32xx specific image targets to be conditionally dependent on target build configuration. The wrapped image targets always contain a U-Boot SPL binary and the images are supposed to be directly flashed on a NAND flash device for read access by LPC32xx NAND MLC controller.
Signed-off-by: Vladimir Zapolskiy <v...@mleia.com> --- Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Makefile b/Makefile index e38966edbaa7..76f1e537cb64 100644 --- a/Makefile +++ b/Makefile @@ -1131,6 +1131,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) +ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) lpc32xx-spl.img: spl/u-boot-spl.bin FORCE @@ -1150,6 +1151,7 @@ lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE $(call if_changed,cat) CLEAN_FILES += lpc32xx-* +endif OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ --pad-to=$(CONFIG_TPL_PAD_TO) -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot