Hello, new here and learning... The project documentation regarding flat device trees (FDT) ( http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.fdt-control) recommends device tree source (DTS) be placed in one location that appears inconsistent with practice.
The linked README recommends placing DTS files in board/<vendor>/dts/<name>.dts, a very board specific location, yet searching the distributed source tree seems to indicate common practice is to place DTS somewhere in /arch/arm/dts/<name>.dts The documentation reads: Configuration ------------- Use: #define CONFIG_DEFAULT_DEVICE_TREE "<name>" to set the filename of the device tree source. Then put your device treefile into board/<vendor>/dts/<name>.dts This should include your CPU or SOC's device tree file, placed in arch/<arch>/dts, and then make any adjustments required. Am I missing something obvious? Looking for a little clarification, perhaps it's a simple matter of practice moving forward in front of documentation? Thank you! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot