[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found

[Michal Simek]

From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>

This patch gets clock from clock nodes if no clock property found
in serial node.

Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/serial/serial_pl01x.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 2a5f256184f2..f4f33b13ff33 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -10,6 +10,7 @@
 
 /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
 
+#include <clk.h>
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -341,6 +342,9 @@ int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
 {
        struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
        fdt_addr_t addr;
+       unsigned long clock;
+       int ret;
+       struct clk clk;
 
        addr = devfdt_get_addr(dev);
        if (addr == FDT_ADDR_T_NONE)
@@ -348,6 +352,28 @@ int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
 
        plat->base = addr;
        plat->clock = dev_read_u32_default(dev, "clock", 1);
+       if (plat->clock == 1) {
+               ret = clk_get_by_index(dev, 0, &clk);
+               if (ret < 0) {
+                       dev_err(dev, "failed to get clock\n");
+                       return ret;
+               }
+
+               clock = clk_get_rate(&clk);
+               if (IS_ERR_VALUE(clock)) {
+                       dev_err(dev, "failed to get rate\n");
+                       return clock;
+               }
+               debug("%s: CLK %ld\n", __func__, clock);
+
+               ret = clk_enable(&clk);
+               if (ret && ret != -ENOSYS) {
+                       dev_err(dev, "failed to enable clock\n");
+                       return ret;
+               }
+               plat->clock = clock;
+       }
+
        plat->type = dev_get_driver_data(dev);
        plat->skip_init = dev_read_bool(dev, "skip-init");
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot