On 05/10/2018 13:59, Lokesh Vutla wrote:
Hi JJ,
On Thursday 04 October 2018 07:17 PM, Jean-Jacques Hiblot wrote:
This series remove the usage of the DM_I2C_COMPAT option for all the ti
platforms. It also takes this opportunity to not disable DM_I2C in
the SPL.
There are a couples of issues to fix:
- CMD_EEPROM does not support the DM API. Fixed by removing this option
when DM_I2C is used without DM_I2C_COMPAT
- i2c_get_chip_for_busnum() does not work when OF_CONTROL is not used
(as is the case with am33xx SPL).
- The I2C driver do not support DM_I2C without OF_CONTROL.
- Most of the PMIC drivers do not support the I2C DM API.
- Board detection is done prior DM initialization. Fixed by moving it
after
DM is initialized. That move breaks the DRA7 platforms (The fixes for
that are at the last 5 patches this series)
When all this is taken care of DM_I2C_COMPAT can be removed and DM_I2C
enabled in the SPL.
This has been tested with the following boards:
- am437x SK
- am335x SK
- am335x beaglebone (both DM and non-DM config)
- dra76 evm
- am572 evm
- k2g evm
I triggered a Travis-CI buid[1] for this series and there are 2 build
failures. Can you check?
Should be fixed in the v2. It passes buildman on my machine, but we may
not have the same default compiler flags.
Thanks,
JJ
[1] https://travis-ci.org/lokeshvutla/u-boot/builds/437487725
Thanks and regards,
Lokesh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
