On 09.08.2018 23:57, Marek Vasut wrote:
On 08/09/2018 09:17 PM, Simon Goldschmidt wrote:
On Mon, Aug 6, 2018 at 3:45 PM Simon Goldschmidt
<simon.k.r.goldschm...@gmail.com> wrote:
Marek Vasut <ma...@denx.de> schrieb am Mo., 6. Aug. 2018, 15:19:
On 08/06/2018 03:05 PM, Simon Goldschmidt wrote:
This fixes the board's dts to supply SPL with QSPI info.
The EBV Socrates board has DIP switches to boot from SD card or
QSPI, so let's fix its defconfig to work for both cases.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
---
arch/arm/dts/socfpga_cyclone5_socrates.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/socfpga_cyclone5_socrates.dts
b/arch/arm/dts/socfpga_cyclone5_socrates.dts
index 0d452ae300..46d7eabdc8 100644
--- a/arch/arm/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/dts/socfpga_cyclone5_socrates.dts
@@ -63,6 +63,7 @@
&qspi {
status = "okay";
+ u-boot,dm-pre-reloc;
flash0: n25q00@0 {
#address-cells = <1>;
@@ -77,6 +78,7 @@
cdns,tsd2d-ns = <50>;
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
+ u-boot,dm-pre-reloc;
};
};
But the SoCrates boots from SDMMC :-)
Yours might :-)
As written above, the board has an 8 digit dip switch to control both hps and
fpga boot sources. And I use this board to verify that mainline U-Boot (without
our private board configs, which boot from qspi) works on the architecture.
So, will it be ok to merge this patch or do we need a separate dts for
running from qspi (much like you did recently for the gen10 clk
items)? That might be a bad choice though, as my configuration
currently runs for both boot types (when enabling both environment
drivers).
If it works with both out of the box, then that's fine.
So can this be merged? I need different config settings than the
defconfig by now to get qspi running, but the device tree works without
changes with this added and I can boot the socrates from all its 3
sources available from the DIP switches (MMC, QSPI, FPGA).
Simon
BTW, the DIP switches even allow the SoCrates to boot from fpga, which
is what I'm currently working on. In this case, it seems like we need
a separate config at least, but the dts can still be the same.
Presumably because the SPL needs different link address ?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
