On Thu, Oct 18, 2018 at 5:52 AM Anatolij Gustschin <ag...@denx.de> wrote:
>
> From: Peng Fan <peng....@nxp.com>
>
> Add i.MX8QXP MEK board support
> Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver.
> Added README file.
>
> Signed-off-by: Peng Fan <peng....@nxp.com>
> Reviewed-by: Anatolij Gustschin <ag...@denx.de>
> Cc: Stefano Babic <sba...@denx.de>
> Cc: Fabio Estevam <fabio.este...@nxp.com>
> ---
>  arch/arm/dts/Makefile                     |   2 +
>  arch/arm/dts/fsl-imx8qxp-mek.dts          | 246 ++++++++++++++++++++++
>  arch/arm/mach-imx/imx8/Kconfig            |  13 ++
>  board/freescale/imx8qxp_mek/Kconfig       |  14 ++
>  board/freescale/imx8qxp_mek/MAINTAINERS   |   6 +
>  board/freescale/imx8qxp_mek/Makefile      |   7 +
>  board/freescale/imx8qxp_mek/README        |  72 +++++++
>  board/freescale/imx8qxp_mek/imx8qxp_mek.c | 170 +++++++++++++++
>  board/freescale/mx8mq_evk/README          |  81 +++++++

Peng,

Was the inclusion of the mx8mq_evk/README a mistake as this patch was
centered around adding support for the i.MX8QXP MEK board?

I'm interested in building mainline U-Boot for the NXP i.MX 8M Quad
Evaluation Kit (IMX8MQUADEVKQSG) which I assume is what the mx8mq_evk
is for. Do you have plans to submit the rest of what's required for
this board (configs/mx8mq_evk_defconfig, board/freescale/mx8mq_evk/*,
arch/arm/dts/fsl-imx8mq-evk.dts).

It looks like inclusion of imx8mq-evk was was in a patch series early
this year and got stalled for some reason?

Regards,

Tim
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to