All existing TI SoCs network HW have similar MDIO implementation, so introduce common mdio support library which can be reused by TI networking drivers.
Reviewed-by: Tom Rini <tr...@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com> --- drivers/net/ti/Makefile | 2 +- drivers/net/ti/cpsw_mdio.c | 203 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/ti/cpsw_mdio.h | 18 ++++ 3 files changed, 222 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ti/cpsw_mdio.c create mode 100644 drivers/net/ti/cpsw_mdio.h diff --git a/drivers/net/ti/Makefile b/drivers/net/ti/Makefile index 4ab4a27..d2b6f20 100644 --- a/drivers/net/ti/Makefile +++ b/drivers/net/ti/Makefile @@ -2,6 +2,6 @@ # # Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ -obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o +obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o cpsw_mdio.o obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o diff --git a/drivers/net/ti/cpsw_mdio.c b/drivers/net/ti/cpsw_mdio.c new file mode 100644 index 0000000..70f547e --- /dev/null +++ b/drivers/net/ti/cpsw_mdio.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * CPSW MDIO generic driver for TI AMxx/K2x/EMAC devices. + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <common.h> +#include <asm/io.h> +#include <miiphy.h> +#include <wait_bit.h> + +struct cpsw_mdio_regs { + u32 version; + u32 control; +#define CONTROL_IDLE BIT(31) +#define CONTROL_ENABLE BIT(30) +#define CONTROL_FAULT BIT(19) +#define CONTROL_FAULT_ENABLE BIT(18) +#define CONTROL_DIV_MASK GENMASK(15, 0) + + u32 alive; + u32 link; + u32 linkintraw; + u32 linkintmasked; + u32 __reserved_0[2]; + u32 userintraw; + u32 userintmasked; + u32 userintmaskset; + u32 userintmaskclr; + u32 __reserved_1[20]; + + struct { + u32 access; + u32 physel; +#define USERACCESS_GO BIT(31) +#define USERACCESS_WRITE BIT(30) +#define USERACCESS_ACK BIT(29) +#define USERACCESS_READ (0) +#define USERACCESS_PHY_REG_SHIFT (21) +#define USERACCESS_PHY_ADDR_SHIFT (16) +#define USERACCESS_DATA GENMASK(15, 0) + } user[0]; +}; + +#define CPSW_MDIO_DIV_DEF 0xff +#define PHY_REG_MASK 0x1f +#define PHY_ID_MASK 0x1f + +/* + * This timeout definition is a worst-case ultra defensive measure against + * unexpected controller lock ups. Ideally, we should never ever hit this + * scenario in practice. + */ +#define CPSW_MDIO_TIMEOUT 100 /* msecs */ + +struct cpsw_mdio { + struct cpsw_mdio_regs *regs; + struct mii_dev *bus; + int div; +}; + +/* wait until hardware is ready for another user access */ +static int cpsw_mdio_wait_for_user_access(struct cpsw_mdio *mdio) +{ + return wait_for_bit_le32(&mdio->regs->user[0].access, + USERACCESS_GO, false, + CPSW_MDIO_TIMEOUT, false); +} + +static int cpsw_mdio_read(struct mii_dev *bus, int phy_id, + int dev_addr, int phy_reg) +{ + struct cpsw_mdio *mdio = bus->priv; + int data, ret; + u32 reg; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + ret = cpsw_mdio_wait_for_user_access(mdio); + if (ret) + return ret; + reg = (USERACCESS_GO | USERACCESS_READ | + (phy_reg << USERACCESS_PHY_REG_SHIFT) | + (phy_id << USERACCESS_PHY_ADDR_SHIFT)); + writel(reg, &mdio->regs->user[0].access); + ret = cpsw_mdio_wait_for_user_access(mdio); + if (ret) + return ret; + + reg = readl(&mdio->regs->user[0].access); + data = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -1; + return data; +} + +static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr, + int phy_reg, u16 data) +{ + struct cpsw_mdio *mdio = bus->priv; + u32 reg; + int ret; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + ret = cpsw_mdio_wait_for_user_access(mdio); + if (ret) + return ret; + reg = (USERACCESS_GO | USERACCESS_WRITE | + (phy_reg << USERACCESS_PHY_REG_SHIFT) | + (phy_id << USERACCESS_PHY_ADDR_SHIFT) | + (data & USERACCESS_DATA)); + writel(reg, &mdio->regs->user[0].access); + + return cpsw_mdio_wait_for_user_access(mdio); +} + +u32 cpsw_mdio_get_alive(struct mii_dev *bus) +{ + struct cpsw_mdio *mdio = bus->priv; + u32 val; + + val = readl(&mdio->regs->control); + return val & GENMASK(15, 0); +} + +struct mii_dev *cpsw_mdio_init(const char *name, u32 mdio_base, + u32 bus_freq, int fck_freq) +{ + struct cpsw_mdio *cpsw_mdio; + int ret; + + cpsw_mdio = calloc(1, sizeof(*cpsw_mdio)); + if (!cpsw_mdio) { + debug("failed to alloc cpsw_mdio\n"); + return NULL; + } + + cpsw_mdio->bus = mdio_alloc(); + if (!cpsw_mdio->bus) { + debug("failed to alloc mii bus\n"); + free(cpsw_mdio); + return NULL; + } + + cpsw_mdio->regs = (struct cpsw_mdio_regs *)mdio_base; + + if (!bus_freq || !fck_freq) + cpsw_mdio->div = CPSW_MDIO_DIV_DEF; + else + cpsw_mdio->div = (fck_freq / bus_freq) - 1; + cpsw_mdio->div &= CONTROL_DIV_MASK; + + /* set enable and clock divider */ + writel(cpsw_mdio->div | CONTROL_ENABLE | CONTROL_FAULT | + CONTROL_FAULT_ENABLE, &cpsw_mdio->regs->control); + wait_for_bit_le32(&cpsw_mdio->regs->control, + CONTROL_IDLE, false, CPSW_MDIO_TIMEOUT, true); + + /* + * wait for scan logic to settle: + * the scan time consists of (a) a large fixed component, and (b) a + * small component that varies with the mii bus frequency. These + * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x + * silicon. Since the effect of (b) was found to be largely + * negligible, we keep things simple here. + */ + mdelay(1); + + cpsw_mdio->bus->read = cpsw_mdio_read; + cpsw_mdio->bus->write = cpsw_mdio_write; + cpsw_mdio->bus->priv = cpsw_mdio; + snprintf(cpsw_mdio->bus->name, sizeof(cpsw_mdio->bus->name), name); + + ret = mdio_register(cpsw_mdio->bus); + if (ret < 0) { + debug("failed to register mii bus\n"); + goto free_bus; + } + + return cpsw_mdio->bus; + +free_bus: + mdio_free(cpsw_mdio->bus); + free(cpsw_mdio); + return NULL; +} + +void cpsw_mdio_free(struct mii_dev *bus) +{ + struct cpsw_mdio *mdio = bus->priv; + u32 reg; + + /* disable mdio */ + reg = readl(&mdio->regs->control); + reg &= ~CONTROL_ENABLE; + writel(reg, &mdio->regs->control); + + mdio_unregister(bus); + mdio_free(bus); + free(mdio); +} diff --git a/drivers/net/ti/cpsw_mdio.h b/drivers/net/ti/cpsw_mdio.h new file mode 100644 index 0000000..4a76d4e --- /dev/null +++ b/drivers/net/ti/cpsw_mdio.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * CPSW MDIO generic driver API for TI AMxx/K2x/EMAC devices. + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#ifndef CPSW_MDIO_H_ +#define CPSW_MDIO_H_ + +struct cpsw_mdio; + +struct mii_dev *cpsw_mdio_init(const char *name, u32 mdio_base, + u32 bus_freq, int fck_freq); +void cpsw_mdio_free(struct mii_dev *bus); +u32 cpsw_mdio_get_alive(struct mii_dev *bus); + +#endif /* CPSW_MDIO_H_ */ -- 2.10.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
