Hi,
does anyone know, if it is possible to use SPI in U-Boot on a Raspberry
Pi 3 Model B?
What I'm trying to achieve:
- Connect a TPM 2.0 via SPI to the Raspberry Pi and communicate with it
What I already have:
- Compiled U-Boot with support for Raspberry Pi 3 Model B; I can access
the console and I can boot Raspbian from the SD-card
Questions / Problems:
- How do I activate SPI support? I have enabled CONFIG_SPI,
CONFIG_CMD_SPI and CONFIG_DM_SPI. I guess, I'd have also have to enable
some Raspberry Pi specific SPI driver to make it work?
-> It seems like there is no driver for it, yet? (as far as I understand
this: there would need to be a bcm2835 SPI driver, right?)
-> Would it be possible to alternatively use the SOFT_SPI driver (maybe
that's also the easier way?)? (because it seems like one can access the
GPIOs from U-Boot already, so that seems to be implemented) However, I
can't find much about how this needs to be setup. BTW the U-Boot README
references to the file "include/configs/sacsng.h" for an example, but
that file doesn't exist anymore in the current master.
Thanks!
Torben
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
