Hi Jagan On Mon, Nov 5, 2018 at 10:02 AM Maxime Ripard <maxime.rip...@bootlin.com> wrote: > > On Wed, Oct 31, 2018 at 08:03:16PM +0100, Michael Trimarchi wrote: > > When we initialize the memory we need to autodetect rank and size > > but this can happen only if we send the proper reset to both > > memory module including cke signal. > > For this reason we need initialize the physical on both channel because > > we need to presume that both are connected. This way let the CLKE to be > > activated at the right time with the memory reset coming from the cpu > > > > Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com> > > Acked-by: Maxime Ripard <maxime.rip...@bootlin.com> >
Can you test on a consumer board with A33? I have tested over oscilloscope on my device Michael > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
