Hi Stefano On Thu, 2018-11-08 at 15:07 +0100, Stefano Babic wrote: > Hi Marcel, > > On 08/11/18 02:55, Fabio Estevam wrote: > > [Adding Stefano] > > > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler <mar...@ziswiler.com > > > wrote: > > > > > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > > > The make macro to check if the binary exceeds the board size > > > limit is > > > taken straight from the root Makefile. > > > > > > Without this and e.g. enabled EFI Vybrid fails booting as the > > > regular > > > size limit check does not take the final u-boot.imx binary size > > > into > > > account which is bigger due to alignment as well as IMX header > > > stuff. > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > Reviewed-by: Fabio Estevam <feste...@gmail.com> > > > > Hi Stefano, maybe this could be material for 2018.11? > > > > Added both patches to u-boot-imx, check is effective, now size is too > much and build fails: > > > Building current source for 1 boards (1 thread, 8 jobs per thread) > arm: + colibri_vf > +u-boot.imx exceeds file size limit: > + limit: 520192 bytes > + actual: 526104 bytes > + excess: 5912 bytes > +make[2]: *** [u-boot.imx] Error 1 > +make[1]: *** [u-boot.imx] Error 2 > +make: *** [sub-make] Error 2 > 0 0 1 /1 colibri_vf > > Can you take a look ?
I sent a v2 additionally dropping CONFIG_CMDLINE_EDITING and SPI support saving another 8 Kb which for me makes it work right back to GCC 6.1.1 which I believe is anyway about as far back as one can go even compiling U-Boot. Can you please give that another go? > Best regards, > Stefeano Cheers Marcel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot