Hi,

I found the problem: the linux kernel 2.6.25 from the freescale LTIB
is missing support for initrd via U-Boot.

With the patch below I was able to use an initramfs from a seperate
image, I suppose initrd should work, too. It is a quick hack, but it
works for me and I wanted to give the solution after having asked
here.

Regards,
Wolfgang


diff -ur linux-2.6.25_orig_for_diff/arch/m68k/coldfire/config.c 
linux-2.6.25/arch/m68k/coldfire/config.c
--- linux-2.6.25_orig_for_diff/arch/m68k/coldfire/config.c      2010-01-25 
17:27:29.000000000 +0100
+++ linux-2.6.25/arch/m68k/coldfire/config.c    2010-04-07 11:53:56.000000000 
+0200
@@ -33,6 +33,7 @@
 #include <asm/movs.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
+#include <linux/initrd.h>
 
 #include <asm/mcfsim.h>
 
@@ -128,6 +129,14 @@
        uboot_info.cmd_line_start = (*(u32 *)(uboot_info_stk+12)) + offset;
        uboot_info.cmd_line_stop = (*(u32 *)(uboot_info_stk+16)) + offset;
 
+       if(uboot_info.initrd_start && uboot_info.initrd_end &&
+               (uboot_info.initrd_end > uboot_info.initrd_start)) {
+               initrd_start = uboot_info.initrd_start;
+               initrd_end = uboot_info.initrd_end;
+               printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+                       initrd_start, initrd_end);
+       }
+
        /* copy over mac addresses */
        memcpy(uboot_enet0, uboot_info.bdi->bi_enet0addr, 6);
        memcpy(uboot_enet1, uboot_info.bdi->bi_enet1addr, 6);
diff -ur linux-2.6.25_orig_for_diff/arch/m68k/kernel/setup.c 
linux-2.6.25/arch/m68k/kernel/setup.c
--- linux-2.6.25_orig_for_diff/arch/m68k/kernel/setup.c 2010-01-25 
17:27:29.000000000 +0100
+++ linux-2.6.25/arch/m68k/kernel/setup.c       2010-04-07 11:53:30.000000000 
+0200
@@ -341,6 +341,19 @@
 
        paging_init();
 
+#if defined(CONFIG_COLDFIRE)
+       if (initrd_start && initrd_end &&
+               (initrd_end > initrd_start)) {
+               unsigned long initrd_size = initrd_end - initrd_start;
+               reserve_bootmem_node(__virt_to_node(phys_to_virt(initrd_start)),
+                                    initrd_start, initrd_size,
+                                    BOOTMEM_DEFAULT);
+               initrd_start = (unsigned long)phys_to_virt(initrd_start);
+               initrd_end = initrd_start + initrd_size;
+               printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
+       }
+#endif
+
 #if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
        for (i = 1; i < m68k_num_memory; i++)
                free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to