This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/mach-imx/mx7/Kconfig | 1 -
board/compulab/cl-som-imx7/Kconfig | 28 --
board/compulab/cl-som-imx7/MAINTAINERS | 6 -
board/compulab/cl-som-imx7/Makefile | 17 --
board/compulab/cl-som-imx7/cl-som-imx7.c | 331 -----------------------
board/compulab/cl-som-imx7/common.c | 45 ---
board/compulab/cl-som-imx7/common.h | 31 ---
board/compulab/cl-som-imx7/mux.c | 141 ----------
board/compulab/cl-som-imx7/spl.c | 210 --------------
configs/cl-som-imx7_defconfig | 67 -----
include/configs/cl-som-imx7.h | 182 -------------
11 files changed, 1059 deletions(-)
delete mode 100644 board/compulab/cl-som-imx7/Kconfig
delete mode 100644 board/compulab/cl-som-imx7/MAINTAINERS
delete mode 100644 board/compulab/cl-som-imx7/Makefile
delete mode 100644 board/compulab/cl-som-imx7/cl-som-imx7.c
delete mode 100644 board/compulab/cl-som-imx7/common.c
delete mode 100644 board/compulab/cl-som-imx7/common.h
delete mode 100644 board/compulab/cl-som-imx7/mux.c
delete mode 100644 board/compulab/cl-som-imx7/spl.c
delete mode 100644 configs/cl-som-imx7_defconfig
delete mode 100644 include/configs/cl-som-imx7.h
diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig
index 63b90f99500..248e5003575 100644
--- a/arch/arm/mach-imx/mx7/Kconfig
+++ b/arch/arm/mach-imx/mx7/Kconfig
@@ -65,7 +65,6 @@ endchoice
config SYS_SOC
default "mx7"
-source "board/compulab/cl-som-imx7/Kconfig"
source "board/freescale/mx7dsabresd/Kconfig"
source "board/toradex/colibri_imx7/Kconfig"
diff --git a/board/compulab/cl-som-imx7/Kconfig
b/board/compulab/cl-som-imx7/Kconfig
deleted file mode 100644
index 6d69cf31f44..00000000000
--- a/board/compulab/cl-som-imx7/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-if TARGET_CL_SOM_IMX7
-
-config SYS_BOARD
- default "cl-som-imx7"
-
-config SYS_VENDOR
- default "compulab"
-
-config SYS_CONFIG_NAME
- default "cl-som-imx7"
-
-config SYS_MMC_DEV
- int
- default 0
-
-config SYS_USB_DEV
- int
- default 0
-
-config SYS_MMC_IMG_LOAD_PART
- int
- default 1
-
-config SYS_USB_IMG_LOAD_PART
- int
- default 1
-
-endif
diff --git a/board/compulab/cl-som-imx7/MAINTAINERS
b/board/compulab/cl-som-imx7/MAINTAINERS
deleted file mode 100644
index 2b917a5c807..00000000000
--- a/board/compulab/cl-som-imx7/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CL-SOM-IMX7 BOARD
-M: Uri Mashiach <uri.mashi...@compulab.co.il>
-S: Maintained
-F: board/compulab/cl-som-imx7
-F: include/configs/cl-som-imx7.h
-F: configs/cl-som-imx7_defconfig
diff --git a/board/compulab/cl-som-imx7/Makefile
b/board/compulab/cl-som-imx7/Makefile
deleted file mode 100644
index 8f0e068b7e9..00000000000
--- a/board/compulab/cl-som-imx7/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile
-#
-# (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
-#
-# Author: Uri Mashiach <uri.mashi...@compulab.co.il>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := mux.o common.o
-
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-y += cl-som-imx7.o
-endif
diff --git a/board/compulab/cl-som-imx7/cl-som-imx7.c
b/board/compulab/cl-som-imx7/cl-som-imx7.c
deleted file mode 100644
index 1bc33b0a7ba..00000000000
--- a/board/compulab/cl-som-imx7/cl-som-imx7.c
+++ /dev/null
@@ -1,331 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot board functions for CompuLab CL-SOM-iMX7 module
- *
- * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
- *
- * Author: Uri Mashiach <uri.mashi...@compulab.co.il>
- */
-
-#include <common.h>
-#include <environment.h>
-#include <mmc.h>
-#include <phy.h>
-#include <netdev.h>
-#include <fsl_esdhc.h>
-#include <power/pmic.h>
-#include <power/pfuze3000_pmic.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/arch-mx7/mx7-pins.h>
-#include <asm/arch-mx7/sys_proto.h>
-#include <asm/arch-mx7/clock.h>
-#include "../common/eeprom.h"
-#include "common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SYS_I2C_MXC
-
-#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS)
-
-#define CL_SOM_IMX7_GPIO_I2C2_SCL IMX_GPIO_NR(1, 6)
-#define CL_SOM_IMX7_GPIO_I2C2_SDA IMX_GPIO_NR(1, 7)
-
-static struct i2c_pads_info cl_som_imx7_i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX7D_PAD_GPIO1_IO06__I2C2_SCL |
- MUX_PAD_CTRL(I2C_PAD_CTRL),
- .gpio_mode = MX7D_PAD_GPIO1_IO06__GPIO1_IO6 |
- MUX_PAD_CTRL(I2C_PAD_CTRL),
- .gp = CL_SOM_IMX7_GPIO_I2C2_SCL,
- },
- .sda = {
- .i2c_mode = MX7D_PAD_GPIO1_IO07__I2C2_SDA |
- MUX_PAD_CTRL(I2C_PAD_CTRL),
- .gpio_mode = MX7D_PAD_GPIO1_IO07__GPIO1_IO7 |
- MUX_PAD_CTRL(I2C_PAD_CTRL),
- .gp = CL_SOM_IMX7_GPIO_I2C2_SDA,
- },
-};
-
-/*
- * cl_som_imx7_setup_i2c() - I2C pinmux configuration.
- */
-static void cl_som_imx7_setup_i2c(void)
-{
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &cl_som_imx7_i2c_pad_info2);
-}
-#else /* !CONFIG_SYS_I2C_MXC */
-static void cl_som_imx7_setup_i2c(void) {}
-#endif /* CONFIG_SYS_I2C_MXC */
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
-#ifdef CONFIG_FSL_ESDHC
-
-#define CL_SOM_IMX7_GPIO_USDHC3_PWR IMX_GPIO_NR(6, 11)
-
-static struct fsl_esdhc_cfg cl_som_imx7_usdhc_cfg[3] = {
- {USDHC1_BASE_ADDR, 0, 4},
- {USDHC3_BASE_ADDR},
-};
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- * mmc2 USDHC3 (eMMC)
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- cl_som_imx7_usdhc1_pads_set();
- gpio_request(CL_SOM_IMX7_GPIO_USDHC1_CD, "usdhc1_cd");
- cl_som_imx7_usdhc_cfg[0].sdhc_clk =
- mxc_get_clock(MXC_ESDHC_CLK);
- break;
- case 1:
- cl_som_imx7_usdhc3_emmc_pads_set();
- gpio_request(CL_SOM_IMX7_GPIO_USDHC3_PWR, "usdhc3_pwr");
- gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 0);
- udelay(500);
- gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 1);
- cl_som_imx7_usdhc_cfg[1].sdhc_clk =
- mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers "
- "(%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &cl_som_imx7_usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-#endif /* CONFIG_FSL_ESDHC */
-
-#ifdef CONFIG_FEC_MXC
-
-#define CL_SOM_IMX7_ETH1_PHY_NRST IMX_GPIO_NR(1, 4)
-
-/*
- * cl_som_imx7_rgmii_rework() - Ethernet PHY configuration.
- */
-static void cl_som_imx7_rgmii_rework(struct phy_device *phydev)
-{
- unsigned short val;
-
- /* Ar8031 phy SmartEEE feature cause link status generates glitch,
- * which cause ethernet link down/up issue, so disable SmartEEE
- */
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x3);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
- val &= ~(0x1 << 8);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
-
- /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
-
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
- val &= 0xffe3;
- val |= 0x18;
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
-
- /* introduce tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- val |= 0x0100;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- cl_som_imx7_rgmii_rework(phydev);
-
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-/*
- * cl_som_imx7_handle_mac_address() - set Ethernet MAC address environment.
- *
- * @env_var: MAC address environment variable
- * @eeprom_bus: I2C bus of the environment EEPROM
- *
- * @return: 0 on success, < 0 on failure
- */
-static int cl_som_imx7_handle_mac_address(char *env_var, uint eeprom_bus)
-{
- int ret;
- unsigned char enetaddr[6];
-
- ret = eth_env_get_enetaddr(env_var, enetaddr);
- if (ret)
- return 0;
-
- ret = cl_eeprom_read_mac_addr(enetaddr, eeprom_bus);
- if (ret)
- return ret;
-
- ret = is_valid_ethaddr(enetaddr);
- if (!ret)
- return -1;
-
- return eth_env_set_enetaddr(env_var, enetaddr);
-}
-
-#define CL_SOM_IMX7_FEC_DEV_ID_PRI 0
-
-int board_eth_init(bd_t *bis)
-{
- /* set Ethernet MAC address environment */
- cl_som_imx7_handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS);
- /* Ethernet interface pinmux configuration */
- cl_som_imx7_phy1_rst_pads_set();
- cl_som_imx7_fec1_pads_set();
- /* PHY reset */
- gpio_request(CL_SOM_IMX7_ETH1_PHY_NRST, "eth1_phy_nrst");
- gpio_direction_output(CL_SOM_IMX7_ETH1_PHY_NRST, 0);
- mdelay(10);
- gpio_set_value(CL_SOM_IMX7_ETH1_PHY_NRST, 1);
- /* MAC initialization */
- return fecmxc_initialize_multi(bis, CL_SOM_IMX7_FEC_DEV_ID_PRI,
- CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
-}
-
-/*
- * cl_som_imx7_setup_fec() - Ethernet MAC 1 clock configuration.
- * - ENET1 reference clock mode select.
- * - ENET1_TX_CLK output driver is disabled when configured for ALT1.
- */
-static void cl_som_imx7_setup_fec(void)
-{
- struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
- = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
- /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
- clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
- (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
- IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
-
- set_clk_enet(ENET_125MHZ);
-}
-#else /* !CONFIG_FEC_MXC */
-static void cl_som_imx7_setup_fec(void) {}
-#endif /* CONFIG_FEC_MXC */
-
-#ifdef CONFIG_SPI
-
-static void cl_som_imx7_spi_init(void)
-{
- cl_som_imx7_espi1_pads_set();
-}
-#else /* !CONFIG_SPI */
-static void cl_som_imx7_spi_init(void) {}
-#endif /* CONFIG_SPI */
-
-int board_early_init_f(void)
-{
- cl_som_imx7_uart1_pads_set();
- cl_som_imx7_usb_otg1_pads_set();
-
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- cl_som_imx7_setup_i2c();
- cl_som_imx7_setup_fec();
- cl_som_imx7_spi_init();
-
- return 0;
-}
-
-#ifdef CONFIG_POWER
-#define I2C_PMIC 0
-int power_init_board(void)
-{
- struct pmic *p;
- int ret;
- unsigned int reg, rev_id;
-
- ret = power_pfuze3000_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("PFUZE3000");
- ret = pmic_probe(p);
- if (ret)
- return ret;
-
- pmic_reg_read(p, PFUZE3000_DEVICEID, ®);
- pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
- printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
-
- /* disable Low Power Mode during standby mode */
- pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
-
- return 0;
-}
-#endif /* CONFIG_POWER */
-
-/*
- * cl_som_imx7_setup_wdog() - watchdog configuration.
- * - Output WDOG_B signal to reset external pmic.
- * - Suspend the watchdog timer during low-power modes.
- */
-void cl_som_imx7_setup_wdog(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- cl_som_imx7_wdog_pads_set();
- set_wdog_reset(wdog);
- /*
- * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
- * since we use PMIC_PWRON to reset the board.
- */
- clrsetbits_le16(&wdog->wcr, 0, 0x10);
-}
-
-int board_late_init(void)
-{
- env_set("board_name", "CL-SOM-iMX7");
- cl_som_imx7_setup_wdog();
- return 0;
-}
-
-int checkboard(void)
-{
- char *mode;
-
- if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT))
- mode = "secure";
- else
- mode = "non-secure";
-
- printf("Board: CL-SOM-iMX7 in %s mode\n", mode);
-
- return 0;
-}
diff --git a/board/compulab/cl-som-imx7/common.c
b/board/compulab/cl-som-imx7/common.c
deleted file mode 100644
index e0f90fd5c48..00000000000
--- a/board/compulab/cl-som-imx7/common.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SPL/U-Boot common functions for CompuLab CL-SOM-iMX7 module
- *
- * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
- *
- * Author: Uri Mashiach <uri.mashi...@compulab.co.il>
- */
-
-#include <common.h>
-#include <fsl_esdhc.h>
-#include <asm-generic/gpio.h>
-#include "common.h"
-
-#ifdef CONFIG_SPI
-
-#define CL_SOM_IMX7_GPIO_SPI_CS IMX_GPIO_NR(4, 19)
-
-int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
-{
- return CL_SOM_IMX7_GPIO_SPI_CS;
-}
-
-#endif /* CONFIG_SPI */
-
-#ifdef CONFIG_FSL_ESDHC
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(CL_SOM_IMX7_GPIO_USDHC1_CD);
- break;
- case USDHC3_BASE_ADDR:
- ret = 1; /* Assume uSDHC3 emmc is always present */
- break;
- }
-
- return ret;
-}
-
-#endif /* CONFIG_FSL_ESDHC */
diff --git a/board/compulab/cl-som-imx7/common.h
b/board/compulab/cl-som-imx7/common.h
deleted file mode 100644
index 8b15a59abeb..00000000000
--- a/board/compulab/cl-som-imx7/common.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * SPL/U-Boot common header file for CompuLab CL-SOM-iMX7 module
- *
- * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
- *
- * Author: Uri Mashiach <uri.mashi...@compulab.co.il>
- */
-
-#define PADS_SET_PROT(pads_array) void cl_som_imx7_##pads_array##_set(void)
-
-#ifdef CONFIG_FSL_ESDHC
-#define CL_SOM_IMX7_GPIO_USDHC1_CD IMX_GPIO_NR(5, 0)
-PADS_SET_PROT(usdhc1_pads);
-#endif /* CONFIG_FSL_ESDHC */
-PADS_SET_PROT(uart1_pads);
-#ifdef CONFIG_SPI
-PADS_SET_PROT(espi1_pads);
-#endif /* CONFIG_SPI */
-
-#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_FSL_ESDHC
-PADS_SET_PROT(usdhc3_emmc_pads);
-#endif /* CONFIG_FSL_ESDHC */
-#ifdef CONFIG_FEC_MXC
-PADS_SET_PROT(phy1_rst_pads);
-PADS_SET_PROT(fec1_pads);
-#endif /* CONFIG_FEC_MXC */
-PADS_SET_PROT(usb_otg1_pads);
-PADS_SET_PROT(wdog_pads);
-#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cl-som-imx7/mux.c b/board/compulab/cl-som-imx7/mux.c
deleted file mode 100644
index e29d2deaf2b..00000000000
--- a/board/compulab/cl-som-imx7/mux.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SPL/U-Boot mux functions for CompuLab CL-SOM-iMX7 module
- *
- * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
- *
- * Author: Uri Mashiach <uri.mashi...@compulab.co.il>
- */
-
-#include <common.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/arch-mx7/mx7-pins.h>
-
-#define PADS_SET(pads_array) \
-void cl_som_imx7_##pads_array##_set(void) \
-{ \
- imx_iomux_v3_setup_multiple_pads(pads_array, ARRAY_SIZE(pads_array)); \
-}
-
-#ifdef CONFIG_FSL_ESDHC
-
-#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | \
- PAD_CTL_PUS_PU47KOHM)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-PADS_SET(usdhc1_pads)
-
-#endif /* CONFIG_FSL_ESDHC */
-
-#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
- PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-PADS_SET(uart1_pads)
-
-#ifdef CONFIG_SPI
-
-#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SRE_SLOW | \
- PAD_CTL_DSE_3P3V_32OHM)
-
-#define GPIO_PAD_CTRL (PAD_CTL_PUS_PU5KOHM | PAD_CTL_PUE | \
- PAD_CTL_SRE_SLOW)
-
-static iomux_v3_cfg_t const espi1_pads[] = {
- MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
-};
-
-PADS_SET(espi1_pads)
-
-#endif /* CONFIG_SPI */
-
-#ifndef CONFIG_SPL_BUILD
-
-#ifdef CONFIG_FSL_ESDHC
-
-static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
- MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-PADS_SET(usdhc3_emmc_pads)
-
-#endif /* CONFIG_FSL_ESDHC */
-
-#ifdef CONFIG_FEC_MXC
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_PD100KOHM | PAD_CTL_DSE_3P3V_49OHM)
-#define ENET_PAD_CTRL_MII (PAD_CTL_PUS_PU5KOHM)
-
-static iomux_v3_cfg_t const phy1_rst_pads[] = {
- /* PHY1 RST */
- MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
-};
-
-PADS_SET(phy1_rst_pads)
-
-static iomux_v3_cfg_t const fec1_pads[] = {
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL |
- MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL |
- MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
-};
-
-PADS_SET(fec1_pads)
-
-#endif /* CONFIG_FEC_MXC */
-
-static iomux_v3_cfg_t const usb_otg1_pads[] = {
- MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-PADS_SET(usb_otg1_pads)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-PADS_SET(wdog_pads)
-
-#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cl-som-imx7/spl.c b/board/compulab/cl-som-imx7/spl.c
deleted file mode 100644
index 76a4c8beb02..00000000000
--- a/board/compulab/cl-som-imx7/spl.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SPL board functions for CompuLab CL-SOM-iMX7 module
- *
- * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
- *
- * Author: Uri Mashiach <uri.mashi...@compulab.co.il>
- */
-
-#include <common.h>
-#include <spl.h>
-#include <fsl_esdhc.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/arch-mx7/mx7-pins.h>
-#include <asm/arch-mx7/clock.h>
-#include <asm/arch-mx7/mx7-ddr.h>
-#include "common.h"
-
-#ifdef CONFIG_FSL_ESDHC
-
-static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
- USDHC1_BASE_ADDR, 0, 4};
-
-int board_mmc_init(bd_t *bis)
-{
- cl_som_imx7_usdhc1_pads_set();
- cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg);
-}
-#endif /* CONFIG_FSL_ESDHC */
-
-static iomux_v3_cfg_t const led_pads[] = {
- MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM |
- PAD_CTL_PUE | PAD_CTL_SRE_SLOW)
-};
-
-static struct ddrc cl_som_imx7_spl_ddrc_regs_val = {
- .init1 = 0x00690000,
- .init0 = 0x00020083,
- .init3 = 0x09300004,
- .init4 = 0x04080000,
- .init5 = 0x00100004,
- .rankctl = 0x0000033F,
- .dramtmg1 = 0x0007020E,
- .dramtmg2 = 0x03040407,
- .dramtmg3 = 0x00002006,
- .dramtmg4 = 0x04020305,
- .dramtmg5 = 0x03030202,
- .dramtmg8 = 0x00000803,
- .zqctl0 = 0x00810021,
- .dfitmg0 = 0x02098204,
- .dfitmg1 = 0x00030303,
- .dfiupd0 = 0x80400003,
- .dfiupd1 = 0x00100020,
- .dfiupd2 = 0x80100004,
- .addrmap4 = 0x00000F0F,
- .odtcfg = 0x06000604,
- .odtmap = 0x00000001,
-};
-
-static struct ddrc_mp cl_som_imx7_spl_ddrc_mp_val = {
- .pctrl_0 = 0x00000001,
-};
-
-static struct ddr_phy cl_som_imx7_spl_ddr_phy_regs_val = {
- .phy_con0 = 0x17420F40,
- .phy_con1 = 0x10210100,
- .phy_con4 = 0x00060807,
- .mdll_con0 = 0x1010007E,
- .drvds_con0 = 0x00000D6E,
- .cmd_sdll_con0 = 0x00000010,
- .offset_lp_con0 = 0x0000000F,
-};
-
-struct mx7_calibration cl_som_imx7_spl_calib_param = {
- .num_val = 5,
- .values = {
- 0x0E407304,
- 0x0E447304,
- 0x0E447306,
- 0x0E447304,
- 0x0E407304,
- },
-};
-
-static void cl_som_imx7_spl_dram_cfg_size(u32 ram_size)
-{
- switch (ram_size) {
- case SZ_256M:
- cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01041001;
- cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
- cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
- cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000014;
- cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00151515;
- cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x03030303;
- cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0303;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
- break;
- case SZ_512M:
- cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
- cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
- cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
- cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000015;
- cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00161616;
- cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
- cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0404;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
- break;
- case SZ_1G:
- cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
- cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046;
- cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109;
- cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000016;
- cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00171717;
- cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
- cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F040404;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x02020202;
- break;
- case SZ_2G:
- cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001;
- cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x0040005E;
- cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E110A;
- cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000018;
- cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00181818;
- cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404;
- cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x04040404;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A;
- cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404;
- break;
- }
-
- mx7_dram_cfg(&cl_som_imx7_spl_ddrc_regs_val,
- &cl_som_imx7_spl_ddrc_mp_val,
- &cl_som_imx7_spl_ddr_phy_regs_val,
- &cl_som_imx7_spl_calib_param);
-}
-
-static void cl_som_imx7_spl_dram_cfg(void)
-{
- ulong ram_size_test, ram_size = 0;
-
- for (ram_size = SZ_2G; ram_size >= SZ_256M; ram_size >>= 1) {
- cl_som_imx7_spl_dram_cfg_size(ram_size);
- ram_size_test = get_ram_size((long int *)PHYS_SDRAM, ram_size);
- if (ram_size_test == ram_size)
- break;
- }
-
- if (ram_size < SZ_256M) {
- puts("!!!ERROR!!! DRAM detection failed!!!\n");
- hang();
- }
-}
-
-#ifdef CONFIG_SPL_SPI_SUPPORT
-
-static void cl_som_imx7_spl_spi_init(void)
-{
- cl_som_imx7_espi1_pads_set();
-}
-#else /* !CONFIG_SPL_SPI_SUPPORT */
-static void cl_som_imx7_spl_spi_init(void) {}
-#endif /* CONFIG_SPL_SPI_SUPPORT */
-
-void board_init_f(ulong dummy)
-{
- imx_iomux_v3_setup_multiple_pads(led_pads, 1);
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
- /* setup GP timer */
- timer_init();
- cl_som_imx7_spl_spi_init();
- cl_som_imx7_uart1_pads_set();
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
- /* DRAM detection */
- cl_som_imx7_spl_dram_cfg();
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-
-void spl_board_init(void)
-{
- u32 boot_device = spl_boot_device();
-
- if (boot_device == BOOT_DEVICE_SPI)
- puts("Booting from SPI flash\n");
- else if (boot_device == BOOT_DEVICE_MMC1)
- puts("Booting from SD card\n");
- else
- puts("Unknown boot device\n");
-}
-
-void board_boot_order(u32 *spl_boot_list)
-{
- spl_boot_list[0] = spl_boot_device();
- switch (spl_boot_list[0]) {
- case BOOT_DEVICE_SPI:
- spl_boot_list[1] = BOOT_DEVICE_MMC1;
- break;
- case BOOT_DEVICE_MMC1:
- spl_boot_list[1] = BOOT_DEVICE_SPI;
- break;
- }
-}
diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig
deleted file mode 100644
index 0eed5264f2a..00000000000
--- a/configs/cl-som-imx7_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX7=y
-CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_CL_SOM_IMX7=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
-CONFIG_IMX_RDC=y
-CONFIG_IMX_BOOTAUX=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-CONFIG_SPI_BOOT=y
-CONFIG_BOOTDELAY=3
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="CL-SOM-iMX7 # "
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_MXC_USB_OTG_HACTIVE=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
deleted file mode 100644
index f84a11215e4..00000000000
--- a/include/configs/cl-som-imx7.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 CompuLab, Ltd.
- *
- * Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module.
- */
-
-#ifndef __CL_SOM_IMX7_CONFIG_H
-#define __CL_SOM_IMX7_CONFIG_H
-
-#include "mx7_common.h"
-
-#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
-
-#define CONFIG_BOARD_LATE_INIT
-
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE 0x4000
-
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
-/* ENET1 */
-#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
-
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
-/* I2C configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C2 /* Enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED 100000
-#define SYS_I2C_BUS_SOM 0
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_BUS SYS_I2C_BUS_SOM
-
-#define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
-#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
-
-#undef CONFIG_SYS_AUTOLOAD
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#undef CONFIG_BOOTCOMMAND
-
-#define CONFIG_SYS_AUTOLOAD "no"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=off\0" \
- "script=boot.scr\0" \
- "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"
\
- "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"
\
- "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${fdtfile};\0" \
- "bootscript=echo Running bootscript from ${storagetype} ...; source
${loadaddr};\0" \
- "storagebootcmd=echo Booting from ${storagetype} ...; run
${storagetype}args; run doboot;\0" \
- "kernel=zImage\0" \
- "console=ttymxc0\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdtfile=imx7d-sbc-imx7.dtb\0" \
- "fdtaddr=0x83000000\0" \
- "mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \
- "usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \
- "doboot=bootz ${loadaddr} - ${fdtaddr}\0" \
- "mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mmcblk${mmcblk}p2 rootwait rw\0" \
- "mmcbootscript=" \
- "if run mmc_config; then " \
- "setenv storagetype mmc;" \
- "setenv storagedev ${mmcdev}:${mmcpart};" \
- "if run loadscript; then " \
- "run bootscript; " \
- "fi; " \
- "fi;\0" \
- "mmcboot=" \
- "if run mmc_config; then " \
- "setenv storagetype mmc;" \
- "setenv storagedev ${mmcdev}:${mmcpart};" \
- "if run loadkernel; then " \
- "if run loadfdt; then " \
- "run storagebootcmd;" \
- "fi; " \
- "fi; " \
- "fi;\0" \
- "sdbootscript=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; " \
- "run mmcbootscript\0" \
- "usbbootscript=setenv usbdev ${usbdev_def}; " \
- "setenv storagetype usb;" \
- "setenv storagedev ${usbdev}:${usbpart};" \
- "if run loadscript; then " \
- "run bootscript; " \
- "fi; " \
- "sdboot=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; run mmcboot\0" \
- "emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \
- "emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "echo SD boot attempt ...; run sdbootscript; run sdboot; " \
- "echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
- "echo USB boot attempt ...; run usbbootscript; "
-
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* SPI Flash support */
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 20000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
-
-/* FLASH and environment organization */
-#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_OFFSET (768 * 1024)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-
-/* MMC Config*/
-#define CONFIG_FSL_USDHC
-#ifdef CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
-
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-#endif
-
-/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-/* Uncomment to enable iMX thermal driver support */
-/*#define CONFIG_IMX_THERMAL*/
-
-/* SPL */
-#include "imx7_spl.h"
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
-#endif /* CONFIG_SPL_BUILD */
-
-#endif /* __CONFIG_H */
--
2.19.1.1215.g8438c0b245-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
